How to Get a Roof Replacement Permit in Burbank, CA (2026 Guide)
Everything you need to know about roof replacement permits in Burbank, CA, local requirements, fees, timelines, and how to apply.
By Joey, Founder · Last updated May 3, 2026 · How we research →
Check your specific roof replacement project
Get an instant, personalized answer for your exact project details in Burbank.
Free Permit Lookup →Do You Need a Roof Replacement Permit in Burbank?
Based on Burbank's local building codes, you'll need a permit when:
Re-roofing requires a building permit.
Roof structural changes require a building permit with engineered plans.
These roof replacement projects are typically exempt in Burbank:
Minor roof repairs do not require a permit.
Permit Fees in Burbank
Based on local Burbank permit data, fees for roof replacement projects typically range:
Here's how fees break down by project scope nationally:
| Project Scope | Typical Permit Fee |
|---|---|
| Standard re-roof (residential) | $150 – $500 |
| Roof repair permit (where required) | $70 – $250 |
| Structural roof changes or additions | $300 – $1,000+ |
| Plan review surcharge (structural changes) | $50 – $200 additional |
| Structural engineering (material change, if required) | $500 – $2,000+ (separate from permit) |
Fees are typically calculated based on estimated project value. Contact Building & Safety Division for exact amounts.
How Long Does It Take?
In Burbank, typical approval time for roof replacement permits is about 1 week.
More complex projects requiring structural review or variances may take longer. Simple projects may qualify for expedited or over-the-counter review in some cases.
How to Apply for a Roof Replacement Permit in Burbank
- 1 Check requirements: Use our free lookup tool or contact Building & Safety Division to confirm your project needs a permit.
- 2 Gather documents: Prepare your application, site plan, construction drawings, and any other required documents.
- 3 Submit online: Burbank accepts applications online at Building & Safety Division.
- 4 Pay fees: Pay the applicable permit fees ($90 – $720).
- 5 Wait for approval: Your application will be reviewed by Burbank plan reviewers. Typical turnaround is about 1 week.
- 6 Begin work: Once approved, post your permit visibly at the job site before starting work.
- 7 Schedule inspections: Call Building & Safety Division at (818) 238-5220 to schedule required inspections at each phase of the project.
Burbank Building Department Contact
Required Inspections in Burbank
Most roof replacement projects in Burbank require inspections at each construction stage:
Deck Inspection (not always required), Condition of the roof deck (sheathing), checking for rot, water damage, delamination, or structural deficiencies. Any damaged decking must be repaired or replaced before new roofing is installed. Inspector verifies repairs were made properly.
Final Inspection, Materials match the permit specifications, underlayment properly installed (double layer required for slopes 2:12 to 4:12), ice and water shield present at eaves/valleys/penetrations (in applicable climate zones), drip edge installed at all eaves and gable edges, proper flashing at walls/chimneys/valleys/penetrations, adequate ventilation (intake and exhaust meeting code ratios), correct nail type/length/pattern per manufacturer specs, proper shingle installation (offset, exposure, starter strips, hip and ridge caps), and overall workmanship.
Schedule inspections with Building & Safety Division at (818) 238-5220 at least 24–48 hours in advance.
Frequently Asked Questions
Whether you need a permit depends on the size and scope of your roof replacement project. In Burbank, some smaller projects are exempt while larger ones require a permit. Use our free lookup tool to check your specific situation.
Permit fees for roof replacement projects in Burbank typically range from $90 – $720. Fees are usually based on the estimated project value.
Typical approval time in Burbank is about 1 week. Complex projects requiring structural review may take longer.
In most cases, homeowners in Burbank can pull permits and perform work on their own primary residence as an owner-builder. You're still responsible for meeting all code requirements and passing inspections.
Working without a required permit in Burbank can result in fines, stop-work orders, required removal of completed work, and complications when selling your home.
Ready to check your roof replacement project in Burbank?
Use our free lookup tool to get a personalized answer based on your specific project details.
Free Permit Lookup →Other Permit Guides for Burbank, CA
Explore more permit guides for Burbank:
Roof Replacement Permits in Nearby Cities
See roof replacement permit requirements in other California cities:
See Detailed Roof Replacement Rules for Burbank
View all local rules, exemptions, and fee details on the permit page.
Roof Replacement Permit Rules →