How to Get a Bathroom Remodel Permit in Burbank, CA (2026 Guide)
Everything you need to know about bathroom remodel permits in Burbank, CA, local requirements, fees, timelines, and how to apply.
By Joey, Founder · Last updated May 3, 2026 · How we research →
Check your specific bathroom remodel project
Get an instant, personalized answer for your exact project details in Burbank.
Free Permit Lookup →Do You Need a Bathroom Remodel Permit in Burbank?
Based on Burbank's local building codes, you'll need a permit when:
Bathroom remodels with electrical changes require an electrical permit.
Moving plumbing fixtures requires building and plumbing permits.
Adding a new bathroom requires building, plumbing, and electrical permits.
Removing walls in a bathroom remodel requires a building permit.
These bathroom remodel projects are typically exempt in Burbank:
Cosmetic bathroom updates without electrical or plumbing changes do not require a permit.
Permit Fees in Burbank
Based on local Burbank permit data, fees for bathroom remodel projects typically range:
Here's how fees break down by project scope nationally:
| Project Scope | Typical Permit Fee |
|---|---|
| Cosmetic remodel (fixtures stay in place) | Usually exempt |
| Plumbing permit (moving or adding fixtures) | $50 – $500 |
| Electrical permit (new circuits or wiring) | $40 – $500 |
| Building permit (structural changes) | $100 – $500 |
| Full gut remodel (multiple trade permits combined) | $400 – $1,500+ |
| Adding a new bathroom | $500 – $2,000+ |
Fees are typically calculated based on estimated project value. Contact Building & Safety Division for exact amounts.
How Long Does It Take?
In Burbank, typical approval time for bathroom remodel permits is about 1 week.
More complex projects requiring structural review or variances may take longer. Simple projects may qualify for expedited or over-the-counter review in some cases.
How to Apply for a Bathroom Remodel Permit in Burbank
- 1 Check requirements: Use our free lookup tool or contact Building & Safety Division to confirm your project needs a permit.
- 2 Gather documents: Prepare your application, site plan, construction drawings, and any other required documents.
- 3 Submit online: Burbank accepts applications online at Building & Safety Division.
- 4 Pay fees: Pay the applicable permit fees ($60 – $720).
- 5 Wait for approval: Your application will be reviewed by Burbank plan reviewers. Typical turnaround is about 1 week.
- 6 Begin work: Once approved, post your permit visibly at the job site before starting work.
- 7 Schedule inspections: Call Building & Safety Division at (818) 238-5220 to schedule required inspections at each phase of the project.
Burbank Building Department Contact
Required Inspections in Burbank
Most bathroom remodel projects in Burbank require inspections at each construction stage:
Rough-In Plumbing Inspection, Drain pipe routing, sizing, and slope (1/4 inch per foot for pipes under 3 inches), supply line routing and pipe sizes, trap-to-vent distances per IRC Table P3105.1, proper pipe support and hangers, and pipes are typically pressure-tested for leaks.
Shower Pan / Waterproofing Inspection, Continuous waterproof membrane properly installed, liner turned up walls at least 2 inches above curb height, drain connection sealed, and a flood test, pan filled with 2 inches of water and held for 15 minutes minimum with no leaking (IRC P2709).
Rough-In Electrical Inspection, Wire gauge appropriate for circuit amperage, circuit routing and box placement, GFCI protection planned for all bathroom receptacles, dedicated 20-amp bathroom circuit, exhaust fan wiring and switch, and wet-location-rated fixtures in shower/tub areas.
Final Inspection, All fixtures installed and functioning, GFCI outlets tested, exhaust fan operational and vented to exterior, plumbing tested with no leaks, proper clearances (21 inches minimum in front of toilet and sink, 24 inches in front of shower entry), minimum 80-inch ceiling height in front of fixtures, and overall compliance with approved plans.
Schedule inspections with Building & Safety Division at (818) 238-5220 at least 24–48 hours in advance.
Frequently Asked Questions
Whether you need a permit depends on the size and scope of your bathroom remodel project. In Burbank, some smaller projects are exempt while larger ones require a permit. Use our free lookup tool to check your specific situation.
Permit fees for bathroom remodel projects in Burbank typically range from $60 – $720. Fees are usually based on the estimated project value.
Typical approval time in Burbank is about 1 week. Complex projects requiring structural review may take longer.
In most cases, homeowners in Burbank can pull permits and perform work on their own primary residence as an owner-builder. You're still responsible for meeting all code requirements and passing inspections.
Working without a required permit in Burbank can result in fines, stop-work orders, required removal of completed work, and complications when selling your home.
Ready to check your bathroom remodel project in Burbank?
Use our free lookup tool to get a personalized answer based on your specific project details.
Free Permit Lookup →Other Permit Guides for Burbank, CA
Explore more permit guides for Burbank:
Bathroom Remodel Permits in Nearby Cities
See bathroom remodel permit requirements in other California cities:
See Detailed Bathroom Remodel Rules for Burbank
View all local rules, exemptions, and fee details on the permit page.
Bathroom Remodel Permit Rules →