How to Get a Retaining Wall Permit in Burbank, CA (2026 Guide)
Everything you need to know about retaining wall permits in Burbank, CA, local requirements, fees, timelines, and how to apply.
By Joey, Founder · Last updated May 3, 2026 · How we research →
Check your specific retaining wall project
Get an instant, personalized answer for your exact project details in Burbank.
Free Permit Lookup →Do You Need a Retaining Wall Permit in Burbank?
Based on Burbank's local building codes, you'll need a permit when:
Retaining walls over 4 feet require a building permit with engineered design.
Retaining walls with surcharge loads require a building permit.
These retaining wall projects are typically exempt in Burbank:
Retaining walls 4 feet or less without surcharge do not require a permit.
Permit Fees in Burbank
Based on local Burbank permit data, fees for retaining wall projects typically range:
Here's how fees break down by project scope nationally:
| Project Scope | Typical Permit Fee |
|---|---|
| Small wall (under 4 ft, exempt) | Usually exempt |
| Standard retaining wall permit (4–6 ft) | $100 – $500 |
| Large or complex wall (6+ ft) | $300 – $1,000+ |
| Structural engineering design | $500 – $3,000+ (separate from permit) |
| Geotechnical (soil) report | $1,500 – $5,000 (separate from permit) |
| Grading permit (if significant earthwork) | $100 – $500+ |
Fees are typically calculated based on estimated project value. Contact Building & Safety Division for exact amounts.
How Long Does It Take?
In Burbank, typical approval time for retaining wall permits is about 2 weeks.
More complex projects requiring structural review or variances may take longer. Simple projects may qualify for expedited or over-the-counter review in some cases.
How to Apply for a Retaining Wall Permit in Burbank
- 1 Check requirements: Use our free lookup tool or contact Building & Safety Division to confirm your project needs a permit.
- 2 Gather documents: Prepare your application, site plan, construction drawings, and any other required documents.
- 3 Submit online: Burbank accepts applications online at Building & Safety Division.
- 4 Pay fees: Pay the applicable permit fees ($90 – $450).
- 5 Wait for approval: Your application will be reviewed by Burbank plan reviewers. Typical turnaround is about 2 weeks.
- 6 Begin work: Once approved, post your permit visibly at the job site before starting work.
- 7 Schedule inspections: Call Building & Safety Division at (818) 238-5220 to schedule required inspections at each phase of the project.
Burbank Building Department Contact
Required Inspections in Burbank
Most retaining wall projects in Burbank require inspections at each construction stage:
Footing / Foundation Inspection, Trench dimensions match approved plans, soil bearing surface is adequate (undisturbed native soil, no loose fill), reinforcement steel is correctly placed, sized, and tied, formwork is correct, and the first course/leveling pad is at the correct depth and grade.
Drainage / Subdrain Inspection, Perforated drain pipe correctly placed at the wall base (behind the footing, not under it), pipe sloped to the outlet at minimum 1%, gravel drainage zone properly sized (minimum 12 inches), filter fabric installed if required by plans, and drain outlet location will function properly.
Reinforcement / Mid-Height Inspection (taller walls), Geogrid layers at correct heights per plans, geogrid extends the correct distance into the backfill, reinforcement is the correct type and strength rating, and backfill compaction is adequate at each lift.
Final Inspection, Wall matches approved plans (height, length, location, materials), wall is plumb and true, cap blocks or coping installed, drainage outlet is functional, grading directs surface water away from the wall, and the site is clean with erosion control in place.
Schedule inspections with Building & Safety Division at (818) 238-5220 at least 24–48 hours in advance.
Frequently Asked Questions
Whether you need a permit depends on the size and scope of your retaining wall project. In Burbank, some smaller projects are exempt while larger ones require a permit. Use our free lookup tool to check your specific situation.
Permit fees for retaining wall projects in Burbank typically range from $90 – $450. Fees are usually based on the estimated project value.
Typical approval time in Burbank is about 2 weeks. Complex projects requiring structural review may take longer.
In most cases, homeowners in Burbank can pull permits and perform work on their own primary residence as an owner-builder. You're still responsible for meeting all code requirements and passing inspections.
Working without a required permit in Burbank can result in fines, stop-work orders, required removal of completed work, and complications when selling your home.
Ready to check your retaining wall project in Burbank?
Use our free lookup tool to get a personalized answer based on your specific project details.
Free Permit Lookup →Other Permit Guides for Burbank, CA
Explore more permit guides for Burbank:
Retaining Wall Permits in Nearby Cities
See retaining wall permit requirements in other California cities:
See Detailed Retaining Wall Rules for Burbank
View all local rules, exemptions, and fee details on the permit page.
Retaining Wall Permit Rules →