How to Get a Pool & Hot Tub Permit in Burbank, CA (2026 Guide)
Everything you need to know about swimming pool, hot tub, or spa permits in Burbank, CA, local requirements, fees, timelines, and how to apply.
By Joey, Founder · Last updated May 3, 2026 · How we research →
Check your specific swimming pool, hot tub, or spa project
Get an instant, personalized answer for your exact project details in Burbank.
Free Permit Lookup →Do You Need a Swimming Pool, Hot Tub, or Spa Permit in Burbank?
Based on Burbank's local building codes, you'll need a permit when:
Above-ground pools deeper than 24 inches require a permit and safety barrier.
In-ground pools require building, electrical, and plumbing permits.
Hot tubs require an electrical permit.
These swimming pool, hot tub, or spa projects are typically exempt in Burbank:
Above-ground pools 24 inches deep or less do not require a permit.
Permit Fees in Burbank
Based on local Burbank permit data, fees for swimming pool, hot tub, or spa projects typically range:
Here's how fees break down by project scope nationally:
| Project Scope | Typical Permit Fee |
|---|---|
| Above-ground pool permit | $50 – $300 |
| In-ground pool permit (standard) | $500 – $2,000 |
| In-ground pool with spa, electrical, and gas | $1,000 – $3,000+ |
| Electrical permit (pool equipment) | $50 – $500 |
| Fence/barrier permit | $50 – $500 |
| Plan review fee (may be separate) | $50 – $500 |
Fees are typically calculated based on estimated project value. Contact Building & Safety Division for exact amounts.
How Long Does It Take?
In Burbank, typical approval time for swimming pool, hot tub, or spa permits is about 2 weeks.
More complex projects requiring structural review or variances may take longer. Simple projects may qualify for expedited or over-the-counter review in some cases.
How to Apply for a Swimming Pool, Hot Tub, or Spa Permit in Burbank
- 1 Check requirements: Use our free lookup tool or contact Building & Safety Division to confirm your project needs a permit.
- 2 Gather documents: Prepare your application, site plan, construction drawings, and any other required documents.
- 3 Submit online: Burbank accepts applications online at Building & Safety Division.
- 4 Pay fees: Pay the applicable permit fees ($60 – $960).
- 5 Wait for approval: Your application will be reviewed by Burbank plan reviewers. Typical turnaround is about 2 weeks.
- 6 Begin work: Once approved, post your permit visibly at the job site before starting work.
- 7 Schedule inspections: Call Building & Safety Division at (818) 238-5220 to schedule required inspections at each phase of the project.
Burbank Building Department Contact
Required Inspections in Burbank
Most swimming pool, hot tub, or spa projects in Burbank require inspections at each construction stage:
Excavation / Pre-Steel Inspection, Excavation dimensions match approved plans, proper depth and shape, soil conditions are adequate, setbacks from property lines verified on-site, and no conflicts with utilities or easements.
Steel / Rebar and Plumbing Inspection, Rebar spacing, placement, and tie-wire connections per engineering plans, main drain installed and positioned correctly, bonding wire (8 AWG minimum solid copper) attached to rebar grid, all plumbing lines in place and pressure-tested (minimum 35 PSI for 15 minutes with no leaks).
Electrical Bonding Inspection, All metal within 5 feet of pool edge is bonded with minimum 8 AWG bare solid copper, equipotential bonding grid extends 3 feet horizontally beyond pool walls, grid installed 4–6 inches below deck subgrade, bonding connections at minimum 4 points around the perimeter, pool water bonded via a listed device, and GFCI protection on all pool pump circuits.
Barrier / Fence Inspection, Fence meets 48-inch minimum height, gates are self-closing and self-latching, latch at 54 inches on non-pool side, no openings allow a 4-inch sphere to pass through, bottom clearance within limits (2 inches over soft surfaces, 4 inches over hard surfaces), no climbable features on the outside, and fence completely encloses the pool area.
Final Inspection, All previous corrections verified, GFCI protection confirmed on all pool circuits, all bonding and grounding per NEC 680, equipment properly installed and operational, receptacles at proper distance from pool (minimum 6 feet), drain covers are ASME A112.19.8 compliant (anti-entrapment), barrier fully compliant, and all permits can be closed.
Schedule inspections with Building & Safety Division at (818) 238-5220 at least 24–48 hours in advance.
Frequently Asked Questions
Whether you need a permit depends on the size and scope of your swimming pool, hot tub, or spa project. In Burbank, some smaller projects are exempt while larger ones require a permit. Use our free lookup tool to check your specific situation.
Permit fees for swimming pool, hot tub, or spa projects in Burbank typically range from $60 – $960. Fees are usually based on the estimated project value.
Typical approval time in Burbank is about 2 weeks. Complex projects requiring structural review may take longer.
In most cases, homeowners in Burbank can pull permits and perform work on their own primary residence as an owner-builder. You're still responsible for meeting all code requirements and passing inspections.
Working without a required permit in Burbank can result in fines, stop-work orders, required removal of completed work, and complications when selling your home.
Ready to check your swimming pool, hot tub, or spa project in Burbank?
Use our free lookup tool to get a personalized answer based on your specific project details.
Free Permit Lookup →Other Permit Guides for Burbank, CA
Explore more permit guides for Burbank:
Swimming Pool, Hot Tub, or Spa Permits in Nearby Cities
See swimming pool, hot tub, or spa permit requirements in other California cities:
See Detailed Swimming Pool, Hot Tub, or Spa Rules for Burbank
View all local rules, exemptions, and fee details on the permit page.
Swimming Pool, Hot Tub, or Spa Permit Rules →