How to Get a Garage Permit in Burbank, CA (2026 Guide)

Everything you need to know about garage permits in Burbank, CA, local requirements, fees, timelines, and how to apply.

By Joey, Founder · Last updated May 3, 2026 · How we research →

$120 – $960 Permit Fees
about 2 weeks Approval Time
5 Local Rules

Check your specific garage project

Get an instant, personalized answer for your exact project details in Burbank.

Free Permit Lookup →

Do You Need a Garage Permit in Burbank?

Based on Burbank's local building codes, you'll need a permit when:

Required·Rule 1

Detached garages over 120 sq ft require a building permit.

SourceCalifornia Building Code / 2022 IRC with local amendments · view source
Required·Rule 2

Attached garages require a building permit.

SourceCalifornia Building Code / 2022 IRC with local amendments · view source
Required·Rule 3

Carport construction requires a building permit.

SourceCalifornia Building Code / 2022 IRC with local amendments · view source
Required·Rule 4

Converting a garage to living space requires multiple permits.

SourceCalifornia Building Code / 2022 IRC with local amendments · view source

These garage projects are typically exempt in Burbank:

Exempt·Rule 1

Detached structures 120 sq ft or less do not require a building permit.

SourceCalifornia Building Code / 2022 IRC with local amendments · view source

Permit Fees in Burbank

Based on local Burbank permit data, fees for garage projects typically range:

$120 – $960 Burbank Permit Fee Range

Here's how fees break down by project scope nationally:

Project ScopeTypical Permit Fee
New detached garage (single-car, 200–400 sq ft)$500 – $1,500
New detached garage (two-car, 400–600 sq ft)$800 – $2,500+
New attached garage$800 – $2,500+
Garage conversion to living space$200 – $1,000
Carport construction$200 – $800
Electrical permit (new circuits, subpanel, or EV charger)$75 – $300
Garage door replacement (where required)$50 – $200
High-cost metros (SF, NYC, Seattle, LA)$1,500 – $5,000+
Plan review fee (in addition to permit)50–65% of base permit fee

Fees are typically calculated based on estimated project value. Contact Building & Safety Division for exact amounts.

How Long Does It Take?

In Burbank, typical approval time for garage permits is about 2 weeks.

More complex projects requiring structural review or variances may take longer. Simple projects may qualify for expedited or over-the-counter review in some cases.

How to Apply for a Garage Permit in Burbank

  1. 1 Check requirements: Use our free lookup tool or contact Building & Safety Division to confirm your project needs a permit.
  2. 2 Gather documents: Prepare your application, site plan, construction drawings, and any other required documents.
  3. 3 Submit online: Burbank accepts applications online at Building & Safety Division.
  4. 4 Pay fees: Pay the applicable permit fees ($120 – $960).
  5. 5 Wait for approval: Your application will be reviewed by Burbank plan reviewers. Typical turnaround is about 2 weeks.
  6. 6 Begin work: Once approved, post your permit visibly at the job site before starting work.
  7. 7 Schedule inspections: Call Building & Safety Division at (818) 238-5220 to schedule required inspections at each phase of the project.

Burbank Building Department Contact

NameBuilding & Safety Division
Apply OnlineApply online
Address150 N Third Street, Burbank, CA 91502
HoursMon-Thu 8am-3:30pm; Fri 8am-3pm

Required Inspections in Burbank

Most garage projects in Burbank require inspections at each construction stage:

Inspection·Stage 1

Foundation / Slab Inspection, Footing dimensions match approved plans, depth is below the local frost line, soil conditions are adequate (no loose fill or organic material), reinforcement (rebar or wire mesh) is positioned correctly, anchor bolt locations and spacing meet code (IRC R403.1.6), vapor barrier is installed under the slab, and any plumbing or electrical conduit is in place before the pour.

WhenAfter forms are set and any required reinforcement is in place, but before concrete is poured
Common FailuresFootings not deep enough (must reach below frost line), missing or misplaced anchor bolts, no vapor barrier under slab, loose soil at the bottom of footings.
Inspection·Stage 2

Framing Inspection, Wall stud sizes and spacing match plans, headers over garage door and window openings are properly sized and supported (jack studs, king studs, cripples), top plates and bottom plates are properly fastened, roof framing (rafters or trusses) matches approved plans, sheathing and nailing patterns meet code, and bracing and tie-downs are installed where required. For attached garages, the connection to the existing house structure is inspected.

WhenAfter all structural framing is complete but before insulation, drywall, or exterior cladding covers the framing, the inspector must be able to see all framing members
Common FailuresUndersized headers for garage door spans, missing or incorrect hurricane ties/straps on roof framing, wrong nailing schedule for sheathing, improper stud spacing.
Inspection·Stage 3

Electrical Inspection, Wire sizes match circuit breaker ratings, GFCI protection on all garage outlets (NEC 210.8(A)(2)), at least one lighting outlet is provided (IRC E3903), proper box fill calculations, wire secured and protected where required, and subpanel or new circuits are properly connected. For EV charger circuits, dedicated circuit capacity and wire sizing are verified.

WhenAfter all wiring is roughed in but before walls are closed up, the inspector must see all wires, boxes, and connections
Common FailuresMissing GFCI protection on garage outlets, wire not properly secured to framing, overfilled junction boxes, wrong wire gauge for the circuit amperage.
Inspection·Stage 4

Fire Separation Inspection (attached garages), Correct drywall thickness on garage side of common walls (1/2-inch minimum), 5/8-inch Type X on ceiling if habitable space is above, all joints and penetrations properly sealed, self-closing door installed between garage and house, door is rated for 20 minutes minimum, and no openings exist between the garage and sleeping rooms (IRC R302.6).

WhenAfter drywall is installed on the garage side of common walls and ceiling, but typically before taping and mudding
Common FailuresWrong drywall thickness (standard 1/2-inch instead of 5/8-inch Type X on ceiling), unsealed penetrations around pipes or wires through fire-rated assemblies, door not self-closing or not properly rated.
Inspection·Stage 5

Final Inspection, Overall project matches approved plans, garage door operates properly, all electrical is complete and functional, fire separation is intact and complete, exterior finish matches plans, grading and drainage direct water away from the foundation, driveway approach meets city standards (if applicable), and address numbers are posted and visible.

WhenAfter all work is complete, exterior finish, garage door installed, electrical finished, driveway approach (if required)
Common FailuresGrading that directs water toward the foundation instead of away, incomplete fire separation, electrical cover plates not installed, project deviates from approved plans.

Schedule inspections with Building & Safety Division at (818) 238-5220 at least 24–48 hours in advance.

Frequently Asked Questions

Whether you need a permit depends on the size and scope of your garage project. In Burbank, some smaller projects are exempt while larger ones require a permit. Use our free lookup tool to check your specific situation.

Permit fees for garage projects in Burbank typically range from $120 – $960. Fees are usually based on the estimated project value.

Typical approval time in Burbank is about 2 weeks. Complex projects requiring structural review may take longer.

In most cases, homeowners in Burbank can pull permits and perform work on their own primary residence as an owner-builder. You're still responsible for meeting all code requirements and passing inspections.

Working without a required permit in Burbank can result in fines, stop-work orders, required removal of completed work, and complications when selling your home.

Ready to check your garage project in Burbank?

Use our free lookup tool to get a personalized answer based on your specific project details.

Free Permit Lookup →

See Detailed Garage Rules for Burbank

View all local rules, exemptions, and fee details on the permit page.

Garage Permit Rules →
Disclaimer: This guide provides general information about garage permit requirements in Burbank, CA. Requirements can change. Always confirm with Building & Safety Division before starting any project. PermitMint provides general guidance, not legal advice.