How to Get a Room Addition Permit in Burbank, CA (2026 Guide)
Everything you need to know about room addition permits in Burbank, CA, local requirements, fees, timelines, and how to apply.
By Joey, Founder · Last updated May 3, 2026 · How we research →
Check your specific room addition project
Get an instant, personalized answer for your exact project details in Burbank.
Free Permit Lookup →Do You Need a Room Addition Permit in Burbank?
Based on Burbank's local building codes, you'll need a permit when:
Room additions up to 200 sq ft require a building permit.
Room additions over 200 sq ft require a building permit with detailed plans.
Multi-story additions require a building permit with engineered plans.
Permit Fees in Burbank
Based on local Burbank permit data, fees for room addition projects typically range:
Here's how fees break down by project scope nationally:
| Project Scope | Typical Permit Fee |
|---|---|
| Small addition or bump-out (under $50K construction) | $500 – $1,500 |
| Standard room addition ($50K–$150K construction) | $1,000 – $3,000 |
| Large addition or second story ($150K+ construction) | $2,000 – $5,000+ |
| Each trade permit (electrical, plumbing, mechanical) | $75 – $500 each |
| Plan review fee (often separate) | ~65% of building permit fee |
| Architectural plans + structural engineering | $5,000 – $15,000+ (separate from permit) |
Fees are typically calculated based on estimated project value. Contact Building & Safety Division for exact amounts.
How Long Does It Take?
In Burbank, typical approval time for room addition permits is about 3 weeks.
More complex projects requiring structural review or variances may take longer. Simple projects may qualify for expedited or over-the-counter review in some cases.
How to Apply for a Room Addition Permit in Burbank
- 1 Check requirements: Use our free lookup tool or contact Building & Safety Division to confirm your project needs a permit.
- 2 Gather documents: Prepare your application, site plan, construction drawings, and any other required documents.
- 3 Submit online: Burbank accepts applications online at Building & Safety Division.
- 4 Pay fees: Pay the applicable permit fees ($150 – $1,800).
- 5 Wait for approval: Your application will be reviewed by Burbank plan reviewers. Typical turnaround is about 3 weeks.
- 6 Begin work: Once approved, post your permit visibly at the job site before starting work.
- 7 Schedule inspections: Call Building & Safety Division at (818) 238-5220 to schedule required inspections at each phase of the project.
Burbank Building Department Contact
Required Inspections in Burbank
Most room addition projects in Burbank require inspections at each construction stage:
Foundation / Footing Inspection, Footing dimensions and depth (must be below frost line), rebar size and spacing per structural plans, soil bearing conditions, anchor bolt placement, and how the new foundation connects to the existing structure. For second-story additions, verification that existing foundation reinforcement (if required) is complete.
Framing Inspection, Stud spacing, header and beam sizes per structural plans, joist hangers and metal connectors, hurricane ties, shear wall nailing, fire blocking, connection between addition and existing structure, window and door framing, and overall structural compliance. Inspector references the approved structural engineering drawings.
Rough-In Trade Inspections (Electrical, Plumbing, Mechanical), Electrical: wire sizing, circuit protection, GFCI/AFCI. Plumbing: pipe sizes, drain slope, venting, pressure tests. Mechanical: duct sizing, clearances, combustion air, gas piping pressure test. All rough-in work must be visible, do not close walls until all trade inspections pass.
Insulation / Energy Inspection, Insulation R-values match approved plans and climate zone requirements per IRC Chapter 11/IECC, proper vapor barrier placement, no gaps or compression in insulation, air sealing at penetrations, and window/door installation quality.
Final Inspection, Smoke and CO detectors installed and operational, egress windows functional, handrails and guardrails meet code, all fixtures and systems working, exterior finishes complete, grading and drainage correct, and overall compliance with approved plans. Final trade inspections (electrical, plumbing, mechanical) may be separate or combined.
Schedule inspections with Building & Safety Division at (818) 238-5220 at least 24–48 hours in advance.
Frequently Asked Questions
Whether you need a permit depends on the size and scope of your room addition project. In Burbank, some smaller projects are exempt while larger ones require a permit. Use our free lookup tool to check your specific situation.
Permit fees for room addition projects in Burbank typically range from $150 – $1,800. Fees are usually based on the estimated project value.
Typical approval time in Burbank is about 3 weeks. Complex projects requiring structural review may take longer.
In most cases, homeowners in Burbank can pull permits and perform work on their own primary residence as an owner-builder. You're still responsible for meeting all code requirements and passing inspections.
Working without a required permit in Burbank can result in fines, stop-work orders, required removal of completed work, and complications when selling your home.
Ready to check your room addition project in Burbank?
Use our free lookup tool to get a personalized answer based on your specific project details.
Free Permit Lookup →Other Permit Guides for Burbank, CA
Explore more permit guides for Burbank:
Room Addition Permits in Nearby Cities
See room addition permit requirements in other California cities:
See Detailed Room Addition Rules for Burbank
View all local rules, exemptions, and fee details on the permit page.
Room Addition Permit Rules →