How to Get a Patio Permit in Burbank, CA (2026 Guide)
Everything you need to know about patio permits in Burbank, CA, local requirements, fees, timelines, and how to apply.
By Joey, Founder · Last updated May 3, 2026 · How we research →
Check your specific patio project
Get an instant, personalized answer for your exact project details in Burbank.
Free Permit Lookup →Do You Need a Patio Permit in Burbank?
Based on Burbank's local building codes, you'll need a permit when:
Covered patios with a solid roof structure require a building permit. They are treated as structural additions and must meet wind and snow load requirements, setback rules, and building code standards.
Elevated patios or platforms more than 30 inches above grade are treated as decks and require a building permit. Structural footings, guard rails (minimum 36 inches), and inspections are required.
These patio projects are typically exempt in Burbank:
Uncovered at-grade patios under 200 square feet generally do not require a building permit. The patio must still comply with setback requirements and impervious surface limits.
Permit Fees in Burbank
Based on local Burbank permit data, fees for patio projects typically range:
Here's how fees break down by project scope nationally:
| Project Scope | Typical Permit Fee |
|---|---|
| Uncovered at-grade patio (where permit needed) | $50 – $150 |
| Covered patio / patio cover | $150 – $500 |
| Covered patio with electrical | $200 – $600 |
| Screened enclosure | $200 – $500 |
| Grading/drainage review (if triggered) | $100 – $400 additional |
Fees are typically calculated based on estimated project value. Contact Building & Safety Division for exact amounts.
How Long Does It Take?
In Burbank, typical approval time for patio permits is about 2 weeks.
More complex projects requiring structural review or variances may take longer. Simple projects may qualify for expedited or over-the-counter review in some cases.
How to Apply for a Patio Permit in Burbank
- 1 Check requirements: Use our free lookup tool or contact Building & Safety Division to confirm your project needs a permit.
- 2 Gather documents: Prepare your application, site plan, construction drawings, and any other required documents.
- 3 Submit online: Burbank accepts applications online at Building & Safety Division.
- 4 Pay fees: Pay the applicable permit fees ($150 – $750).
- 5 Wait for approval: Your application will be reviewed by Burbank plan reviewers. Typical turnaround is about 2 weeks.
- 6 Begin work: Once approved, post your permit visibly at the job site before starting work.
- 7 Schedule inspections: Call Building & Safety Division at (818) 238-5220 to schedule required inspections at each phase of the project.
Burbank Building Department Contact
Required Inspections in Burbank
Most patio projects in Burbank require inspections at each construction stage:
Footing Inspection (covered patios), Hole depth and diameter, depth below frost line, bearing on undisturbed soil, and rebar or anchor placement if required.
Framing Inspection (covered patios), Post sizes, beam spans and sizes, rafter spacing, ledger attachment to house (if attached), hurricane ties, and overall structural compliance with approved plans.
Final Inspection, Covered patios: roofing installation, electrical (GFCI on outdoor outlets, wet-rated fixtures), overall compliance. Uncovered patios: correct location per site plan, proper drainage direction, no drainage toward neighbors.
Schedule inspections with Building & Safety Division at (818) 238-5220 at least 24–48 hours in advance.
Frequently Asked Questions
Whether you need a permit depends on the size and scope of your patio project. In Burbank, some smaller projects are exempt while larger ones require a permit. Use our free lookup tool to check your specific situation.
Permit fees for patio projects in Burbank typically range from $150 – $750. Fees are usually based on the estimated project value.
Typical approval time in Burbank is about 2 weeks. Complex projects requiring structural review may take longer.
In most cases, homeowners in Burbank can pull permits and perform work on their own primary residence as an owner-builder. You're still responsible for meeting all code requirements and passing inspections.
Working without a required permit in Burbank can result in fines, stop-work orders, required removal of completed work, and complications when selling your home.
Ready to check your patio project in Burbank?
Use our free lookup tool to get a personalized answer based on your specific project details.
Free Permit Lookup →Other Permit Guides for Burbank, CA
Explore more permit guides for Burbank:
Patio Permits in Nearby Cities
See patio permit requirements in other California cities:
See Detailed Patio Rules for Burbank
View all local rules, exemptions, and fee details on the permit page.
Patio Permit Rules →