Building Permits in Town of Edgewood, NM

NM, a small accessory concrete slab (walkway, patio pad, small equipment pad) of 200 square feet or less at grade is exempt from a building permit. Larger slabs that will support a future structure or are part of a building foundation fall under the town building permit.

NM, a freestanding deck not more than 30 inches above grade and not more than 200 square feet is exempt from a building permit under 2021 NMRBC R105.2. Town zoning setbacks still apply; call Planning & Zoning at (505) 286-4518 to confirm. Parcels outside town limits fall under the applicable county (Santa Fe, Bernalillo, Sandoval, or Torrance).

NM, fences 7 feet or less are exempt from a state building permit under 2021 NMRBC R105.2. Town of Edgewood zoning ordinance regulates fence height, material, and setback; front-yard fences are typically limited to 3-4 feet while rear/side yard fences up to 6 feet are generally allowed. Call Planning & Zoning at (505) 286-4518 before installing.

NM, an at-grade uncovered concrete, paver, or flagstone patio is exempt from a building permit. Adding a cover, pergola with solid roof, or screen enclosure turns the covered area into an accessory structure requiring a building permit from the Town.

NM, a retaining wall 4 feet or less measured from bottom of footing to top of wall, without surcharge, is exempt from a building permit under 2021 NMRBC R105.2. Drainage and erosion control remain the owner's responsibility. Parcels on steep slopes may trigger Santa Fe County terrain management review.