How to Get a Shed Permit in San Francisco, CA (2026 Guide)
Everything you need to know about shed permits in San Francisco, CA, local requirements, fees, timelines, and how to apply.
By Joey, Founder · Last updated May 15, 2026 · How we research →
Check your specific shed project
Get an instant, personalized answer for your exact project details in San Francisco.
Free Permit Lookup →Do You Need a Shed Permit in San Francisco?
Based on San Francisco's local building codes, you'll need a permit when:
Sheds larger than 120 square feet require a building permit in San Francisco, CA.
Sheds with electrical require building and electrical permits in San Francisco, CA.
These shed projects are typically exempt in San Francisco:
Sheds 120 square feet or less without utilities are exempt from permits in San Francisco, CA.
Permit Fees in San Francisco
Based on local San Francisco permit data, fees for shed projects typically range:
Here's how fees break down by project scope nationally:
| Project Scope | Typical Permit Fee |
|---|---|
| Small shed (under 200 sq ft, storage only) | $50 – $150 |
| Medium shed (200–400 sq ft) | $100 – $300 |
| Large shed or workshop (400+ sq ft) | $150 – $500+ |
| Electrical permit (if adding power to shed) | $50 – $150 additional |
| Plumbing permit (if adding water) | $50 – $200 additional |
| Habitable conversion (ADU/tiny home) | $500 – $2,000+ |
Fees are typically calculated based on estimated project value. Contact Department of Building Inspection (DBI) for exact amounts.
How Long Does It Take?
In San Francisco, typical approval time for shed permits is about 3 weeks.
More complex projects requiring structural review or variances may take longer. Simple projects may qualify for expedited or over-the-counter review in some cases.
How to Apply for a Shed Permit in San Francisco
- 1 Check requirements: Use our free lookup tool or contact Department of Building Inspection (DBI) to confirm your project needs a permit.
- 2 Gather documents: Prepare your application, site plan, construction drawings, and any other required documents.
- 3 Submit online: San Francisco accepts applications online at Department of Building Inspection (DBI).
- 4 Pay fees: Pay the applicable permit fees ($150 – $750).
- 5 Wait for approval: Your application will be reviewed by San Francisco plan reviewers. Typical turnaround is about 3 weeks.
- 6 Begin work: Once approved, post your permit visibly at the job site before starting work.
- 7 Schedule inspections: Call Department of Building Inspection (DBI) at (628) 652-3200 to schedule required inspections at each phase of the project.
San Francisco Building Department Contact
Required Inspections in San Francisco
Most shed projects in San Francisco require inspections at each construction stage:
Foundation Inspection, Forms and reinforcing are in place, proper depth below grade, rebar size and spacing, anchor bolt placement, and soil conditions. For simpler foundations (gravel pads), this inspection may be combined with the final.
Framing Inspection (larger sheds), Lumber sizes and grades, connections and nailing patterns, hurricane ties and straps, header sizes over openings, and overall structural compliance with approved plans.
Final Inspection, Shed is in the correct location per the approved site plan, proper setbacks from property lines, adequate anchoring and tie-down, roof installation, door and window installation, drainage, and overall compliance with approved plans. If electrical was permitted, wiring and panel are checked separately.
Schedule inspections with Department of Building Inspection (DBI) at (628) 652-3200 at least 24–48 hours in advance.
Frequently Asked Questions
Whether you need a permit depends on the size and scope of your shed project. In San Francisco, some smaller projects are exempt while larger ones require a permit. Use our free lookup tool to check your specific situation.
Permit fees for shed projects in San Francisco typically range from $150 – $750. Fees are usually based on the estimated project value.
Typical approval time in San Francisco is about 3 weeks. Complex projects requiring structural review may take longer.
In most cases, homeowners in San Francisco can pull permits and perform work on their own primary residence as an owner-builder. You're still responsible for meeting all code requirements and passing inspections.
Working without a required permit in San Francisco can result in fines, stop-work orders, required removal of completed work, and complications when selling your home.
Ready to check your shed project in San Francisco?
Use our free lookup tool to get a personalized answer based on your specific project details.
Free Permit Lookup →Other Permit Guides for San Francisco, CA
Explore more permit guides for San Francisco:
Shed Permits in Nearby Cities
See shed permit requirements in other California cities:
See Detailed Shed Rules for San Francisco
View all local rules, exemptions, and fee details on the permit page.
Shed Permit Rules →