How to Get a Deck Permit in Hillsboro, OR (2026 Guide)
Everything you need to know about deck permits in Hillsboro, OR, local requirements, fees, timelines, and how to apply.
By Joey, Founder · Last updated June 6, 2026 · How we research →
Check your specific deck project
Get an instant, personalized answer for your exact project details in Hillsboro.
Free Permit Lookup →Do You Need a Deck Permit in Hillsboro?
Based on Hillsboro's local building codes, you'll need a permit when:
Attached decks require a building permit even if under 30 inches.
Decks more than 30 inches above grade require a building permit.
Covered decks or those over 300 sq ft require a building permit.
These deck projects are typically exempt in Hillsboro:
Freestanding decks not more than 30 inches above grade are exempt from a building permit.
Permit Fees in Hillsboro
Based on local Hillsboro permit data, fees for deck projects typically range:
Here's how fees break down by project scope nationally:
| Project Scope | Typical Permit Fee |
|---|---|
| Small deck (under 200 sq ft) | $75 – $250 |
| Medium deck (200–500 sq ft) | $200 – $500 |
| Large or multi-level deck (500+ sq ft) | $400 – $1,000+ |
| High-cost metros (SF, NYC, Seattle) | $500 – $1,500+ |
| Plan review fee (in addition to permit) | 50–65% of base permit fee |
| Re-inspection fee (per failed inspection) | $25 – $75 |
Fees are typically calculated based on estimated project value. Contact Development Services & Permitting Center for exact amounts.
How Long Does It Take?
In Hillsboro, typical approval time for deck permits is about 2 weeks.
More complex projects requiring structural review or variances may take longer. Simple projects may qualify for expedited or over-the-counter review in some cases.
How to Apply for a Deck Permit in Hillsboro
- 1 Check requirements: Use our free lookup tool or contact Development Services & Permitting Center to confirm your project needs a permit.
- 2 Gather documents: Prepare your application, site plan, construction drawings, and any other required documents.
- 3 Submit online: Hillsboro accepts applications online at Development Services & Permitting Center.
- 4 Pay fees: Pay the applicable permit fees ($80 – $540).
- 5 Wait for approval: Your application will be reviewed by Hillsboro plan reviewers. Typical turnaround is about 2 weeks.
- 6 Begin work: Once approved, post your permit visibly at the job site before starting work.
- 7 Schedule inspections: Call Development Services & Permitting Center at (503) 681-6153 to schedule required inspections at each phase of the project.
Hillsboro Building Department Contact
Required Inspections in Hillsboro
Most deck projects in Hillsboro require inspections at each construction stage:
Footing / Pier Inspection, Hole locations match approved plans, hole dimensions (diameter and depth) meet specifications, depth is below the local frost line, holes are clean and free of loose dirt or standing water, rebar or post brackets are positioned correctly if required, and soil conditions are adequate.
Framing Inspection, Ledger board attachment (correct fasteners, proper spacing, flashing installed), post-to-footing connections with approved connectors, beam and joist sizes and spans match approved plans, all joist hangers installed with every nail hole filled, guard rail posts properly connected to framing, stair stringers installed, correct hardware for treated lumber, and lateral bracing for freestanding decks over 30 inches.
Final Inspection, Guard rail height (minimum 36 inches), baluster spacing (maximum 4 inches, a 4-inch sphere cannot pass through), guard rail structural integrity (must resist 200 lb concentrated load), stair riser height (maximum 7-3/4 inches) and tread depth (minimum 10 inches) with uniform measurements, handrail height on stairs (34–38 inches) and graspability (1-1/4 to 2-inch diameter), landings at top and bottom of stairs, and overall completion matching the approved plans.
Schedule inspections with Development Services & Permitting Center at (503) 681-6153 at least 24–48 hours in advance.
Frequently Asked Questions
Whether you need a permit depends on the size and scope of your deck project. In Hillsboro, some smaller projects are exempt while larger ones require a permit. Use our free lookup tool to check your specific situation.
Permit fees for deck projects in Hillsboro typically range from $80 – $540. Fees are usually based on the estimated project value.
Typical approval time in Hillsboro is about 2 weeks. Complex projects requiring structural review may take longer.
In most cases, homeowners in Hillsboro can pull permits and perform work on their own primary residence as an owner-builder. You're still responsible for meeting all code requirements and passing inspections.
Working without a required permit in Hillsboro can result in fines, stop-work orders, required removal of completed work, and complications when selling your home.
Ready to check your deck project in Hillsboro?
Use our free lookup tool to get a personalized answer based on your specific project details.
Free Permit Lookup →Other Permit Guides for Hillsboro, OR
Explore more permit guides for Hillsboro:
Deck Permits in Nearby Cities
See deck permit requirements in other Oregon cities:
See Detailed Deck Rules for Hillsboro
View all local rules, exemptions, and fee details on the permit page.
Deck Permit Rules →