How to Get a Windows and Doors Permit in Los Angeles, CA (2026 Guide)
Everything you need to know about windows and doors permits in Los Angeles, CA, local requirements, fees, timelines, and how to apply.
By Joey, Founder · Last updated May 15, 2026 · How we research →
Check your specific windows and doors project
Get an instant, personalized answer for your exact project details in Los Angeles.
Free Permit Lookup →Do You Need a Windows and Doors Permit in Los Angeles?
Based on Los Angeles's local building codes, you'll need a permit when:
Replacing exterior windows or doors with the same size openings typically requires a building permit in California due to Title 24 energy efficiency requirements. Even like-for-like replacements must meet current energy code standards for glazing U-factor and SHGC.
Changing the size of exterior window or door openings requires a building permit because it involves structural modifications to the wall framing (headers, king studs, cripples). A new or modified header must be sized for the new opening.
Replacing 5 or more exterior windows or doors requires a building permit. Large-scale window replacement projects must demonstrate Title 24 energy compliance for the entire scope of work and may require a CF-1R energy compliance certificate.
These windows and doors projects are typically exempt in Los Angeles:
Replacing interior doors with the same size opening does not require a building permit. No structural modifications are involved in a like-for-like interior door replacement.
Permit Fees in Los Angeles
Based on local Los Angeles permit data, fees for windows and doors projects typically range:
Here's how fees break down by project scope nationally:
| Project Scope | Typical Permit Fee |
|---|---|
| Like-for-like replacement (where permit required) | $50 – $250 |
| New opening or size change (1–3 openings) | $75 – $300 |
| Multiple openings with structural changes | $150 – $500+ |
| Plan review fee (structural changes) | 50–65% of permit fee additional |
| Structural engineering (if needed for headers) | $300 – $800 (separate from permit) |
Fees are typically calculated based on estimated project value. Contact Los Angeles Department of Building and Safety for exact amounts.
How Long Does It Take?
In Los Angeles, typical approval time for windows and doors permits is about 1 week.
More complex projects requiring structural review or variances may take longer. Simple projects may qualify for expedited or over-the-counter review in some cases.
How to Apply for a Windows and Doors Permit in Los Angeles
- 1 Check requirements: Use our free lookup tool or contact Los Angeles Department of Building and Safety to confirm your project needs a permit.
- 2 Gather documents: Prepare your application, site plan, construction drawings, and any other required documents.
- 3 Submit online: Los Angeles accepts applications online at Los Angeles Department of Building and Safety.
- 4 Pay fees: Pay the applicable permit fees ($100 – $1,200).
- 5 Wait for approval: Your application will be reviewed by Los Angeles plan reviewers. Typical turnaround is about 1 week.
- 6 Begin work: Once approved, post your permit visibly at the job site before starting work.
- 7 Schedule inspections: Call Los Angeles Department of Building and Safety at (213) 482-0000 to schedule required inspections at each phase of the project.
Los Angeles Building Department Contact
Required Inspections in Los Angeles
Most windows and doors projects in Los Angeles require inspections at each construction stage:
Framing / Rough Opening Inspection, Header size and installation (correct lumber size, proper bearing on jack studs/trimmers per IRC R602.7), king studs and cripple studs properly installed, rough opening dimensions match approved plans, proper nailing patterns, and flashing/WRB integration at the rough opening. If structural engineering was required, connections must match the stamped drawings.
Final Inspection, Window/door properly installed per manufacturer specifications, NFRC label present and matching approved U-factor and SHGC values, safety glazing in required locations per IRC R308 (look for permanent etched or embossed label on the glass), egress compliance for bedroom windows (net clear opening measurements), weathersealing and air sealing, flashing visible at exterior, and proper operation of the window or door.
Schedule inspections with Los Angeles Department of Building and Safety at (213) 482-0000 at least 24–48 hours in advance.
Frequently Asked Questions
Whether you need a permit depends on the size and scope of your windows and doors project. In Los Angeles, some smaller projects are exempt while larger ones require a permit. Use our free lookup tool to check your specific situation.
Permit fees for windows and doors projects in Los Angeles typically range from $100 – $1,200. Fees are usually based on the estimated project value.
Typical approval time in Los Angeles is about 1 week. Complex projects requiring structural review may take longer.
In most cases, homeowners in Los Angeles can pull permits and perform work on their own primary residence as an owner-builder. You're still responsible for meeting all code requirements and passing inspections.
Working without a required permit in Los Angeles can result in fines, stop-work orders, required removal of completed work, and complications when selling your home.
Ready to check your windows and doors project in Los Angeles?
Use our free lookup tool to get a personalized answer based on your specific project details.
Free Permit Lookup →Other Permit Guides for Los Angeles, CA
Explore more permit guides for Los Angeles:
Windows and Doors Permits in Nearby Cities
See windows and doors permit requirements in other California cities:
See Detailed Windows and Doors Rules for Los Angeles
View all local rules, exemptions, and fee details on the permit page.
Windows and Doors Permit Rules →