How to Get a HVAC Permit in Ann Arbor, MI (2026 Guide)
Everything you need to know about hvac permits in Ann Arbor, MI, local requirements, fees, timelines, and how to apply.
By Joey, Founder · Last updated May 15, 2026 · How we research →
Check your specific hvac project
Get an instant, personalized answer for your exact project details in Ann Arbor.
Free Permit Lookup →Do You Need a HVAC Permit in Ann Arbor?
Based on Ann Arbor's local building codes, you'll need a permit when:
Replacing an HVAC system (even same-for-same) requires a mechanical permit.
Installing a new HVAC system requires mechanical and possibly electrical permits.
Modifying or installing ductwork requires a mechanical permit.
Installing a mini-split system requires mechanical and electrical permits.
Permit Fees in Ann Arbor
Based on local Ann Arbor permit data, fees for hvac projects typically range:
Here's how fees break down by project scope nationally:
| Project Scope | Typical Permit Fee |
|---|---|
| Furnace or AC replacement | $75 – $300 |
| Heat pump installation | $100 – $350 |
| Mini-split installation | $75 – $250 |
| New ductwork | $100 – $400 |
| Gas line permit (separate) | $50 – $200 |
| Electrical permit (if needed for new circuits) | $50 – $200 |
Fees are typically calculated based on estimated project value. Contact Building, Rental and Inspection Services for exact amounts.
How Long Does It Take?
In Ann Arbor, typical approval time for hvac permits is about 1 week.
More complex projects requiring structural review or variances may take longer. Simple projects may qualify for expedited or over-the-counter review in some cases.
How to Apply for a HVAC Permit in Ann Arbor
- 1 Check requirements: Use our free lookup tool or contact Building, Rental and Inspection Services to confirm your project needs a permit.
- 2 Gather documents: Prepare your application, site plan, construction drawings, and any other required documents.
- 3 Submit online: Ann Arbor accepts applications online at Building, Rental and Inspection Services.
- 4 Pay fees: Pay the applicable permit fees ($75 – $500).
- 5 Wait for approval: Your application will be reviewed by Ann Arbor plan reviewers. Typical turnaround is about 1 week.
- 6 Begin work: Once approved, post your permit visibly at the job site before starting work.
- 7 Schedule inspections: Call Building, Rental and Inspection Services at (734) 794-6263 to schedule required inspections at each phase of the project.
Ann Arbor Building Department Contact
Required Inspections in Ann Arbor
Most hvac projects in Ann Arbor require inspections at each construction stage:
Rough-In Mechanical Inspection (new ductwork), Duct sizing and support/hanging, duct sealing at all joints (mastic or UL 181-rated tape), return air pathways, equipment location clearances, combustion air provisions per IRC G2407, and condensate drain routing.
Gas Piping Pressure Test, Gas piping system pressurized (typically 3 PSI for 10 minutes or per local code) with no pressure drop, indicating no leaks. Inspector witnesses the test or verifies documented results. Proper sediment trap (dirt leg) installed ahead of each appliance.
Final Mechanical Inspection, Equipment installed per manufacturer instructions, gas connections tight and leak-tested, venting is correct material with proper slope and termination clearances, condensate drainage functional, thermostat operation verified, CO detectors installed (required in many jurisdictions near gas appliances), system fires up and operates correctly, clearance to combustibles maintained, filter accessible, and equipment nameplate matches the permit.
Schedule inspections with Building, Rental and Inspection Services at (734) 794-6263 at least 24–48 hours in advance.
Frequently Asked Questions
Whether you need a permit depends on the size and scope of your hvac project. In Ann Arbor, some smaller projects are exempt while larger ones require a permit. Use our free lookup tool to check your specific situation.
Permit fees for hvac projects in Ann Arbor typically range from $75 – $500. Fees are usually based on the estimated project value.
Typical approval time in Ann Arbor is about 1 week. Complex projects requiring structural review may take longer.
In most cases, homeowners in Ann Arbor can pull permits and perform work on their own primary residence as an owner-builder. You're still responsible for meeting all code requirements and passing inspections.
Working without a required permit in Ann Arbor can result in fines, stop-work orders, required removal of completed work, and complications when selling your home.
Ready to check your hvac project in Ann Arbor?
Use our free lookup tool to get a personalized answer based on your specific project details.
Free Permit Lookup →Other Permit Guides for Ann Arbor, MI
Explore more permit guides for Ann Arbor:
HVAC Permits in Nearby Cities
See hvac permit requirements in other Michigan cities:
See Detailed HVAC Rules for Ann Arbor
View all local rules, exemptions, and fee details on the permit page.
HVAC Permit Rules →