Driveway Permit Requirements in Yakima County, WA
Yakima County Building and Fire Safety Division issues building, electrical, mechanical, and plumbing permits for unincorporated Yakima County in eastern Washington. Note that the Town of Naches and 13 other incorporated cities (Yakima, Union Gap, Selah, Moxee, Tieton, Zillah, Toppenish, Wapato, Sunnyside, Grandview, Mabton, Granger, Harrah) run their own building offices; parcel verification is required for addresses inside incorporated limits. Codes in force: 2021 Washington State Residential Code (WSRC), 2021 WSBC, 2021 WSMC, 2021 WUPC, 2021 WSEC with Washington State Building Code Council amendments effective March 15, 2024. Design criteria: 110 mph wind, Seismic Design Category C or D-1 (local verification), Climate Zone 5B (eastern WA cold-dry), ground snow 25 psf at valley floor (parcels over 70 psf require engineering), frost depth 24 inches. All contractors must be registered with WA Department of Labor and Industries (L&I), bonded, and insured. Owner-builder permits allowed for primary residence with affidavit. Septic (OSS) via Yakima Health District at (509) 575-4040. Water rights and well permits via WA Department of Ecology. Accela online permit portal. Inspections direct line (509) 574-2370.
By Joey, Founder · Last verified April 22, 2026 · How we research →
When you don’t need a Driveway permit in Yakima County
Resurfacing or sealing an existing driveway in the same footprint does not require a building permit per 2021 WSRC R105.2.
When you need a Driveway permit in Yakima County
A new driveway or widening that affects a public right-of-way requires a driveway permit. The Yakima County Public Services handles connections to county roads; WSDOT handles connections to state routes such as SR 32, SR 125, SR 28, US 50, and US 52.
What Makes Yakima County Different
Here's how Yakima County's driveway rules stack up against the standard IRC baseline that most of the country follows.
Stricter Than the IRC
A new driveway or widening that affects a public right-of-way requires a driveway permit. The Yakima County Public Services handles connections to county roads; WSDOT handles connections to state routes such as SR 32, SR 125, SR 28, US 50, and US 52.
1 rule match the IRC baseline, no surprises there.
Driveway Permit Costs: Yakima County vs. Nearby
| City | Estimated Fee |
|---|---|
| Yakima County | N/A |
| Seattle | $112 – $750 |
| Spokane | $112 – $750 |
| Tacoma | $112 – $750 |
Fees shown are estimates based on local building code data. Actual fees may vary based on project scope and valuation. See all Yakima County permit costs →
Zoning & HOA Considerations
Driveways that require a new curb cut involve public right-of-way work and always need a permit. Driveway width and impervious surface limits vary by city.
If you live in an HOA community: hOAs often regulate driveway materials, width, and appearance. Widening a driveway or changing from concrete to gravel (or vice versa) may need architectural review approval.
Estimated Project Timeline in Yakima County
Here's a typical timeline for a driveway project in Yakima County, WA:
Timeline is based on Yakima County's typical about 2 weeks permit processing time. Actual timelines vary by project complexity, completeness of application, and current department workload.
Need a Driveway permit in Yakima County, WA?
Answer a few quick questions for a personalized answer about your specific project.
Check Now, Free →Building Department Contact
Frequently Asked Questions
Contact Yakima County's building department for current Driveway permit fee information. Fees typically vary based on project scope and valuation.
It depends on the specifics of your project. Some smaller Driveway projects may be exempt from permit requirements, while larger ones typically require a permit. Use our free lookup tool to check your specific situation.
Working without a required permit in Yakima County can result in fines, stop-work orders, being required to remove completed work, and complications when selling your home. It's always best to check first.
Typical approval time for Driveway permits in Yakima County is about 2 weeks. More complex projects may take longer if plan review is required.
If you live in an HOA community, you may need architectural review approval in addition to a building permit. HOA rules and city building codes are separate, you may need to satisfy both. Review your CC&Rs and submit to your HOA's architectural review committee before starting work.
Learn More About Driveway Permits
Read our complete guide covering permit requirements, costs, common exemptions, and the application process.
Read Driveway Guide →