Fence / Gate Permit Requirements in Irving, TX

Irving is a city of 256,684 residents in Texas that follows the 2021 IRC. Irving's building department is stricter than the standard IRC on fence / gate work, expect fewer exemptions and more situations that require a permit. You're looking at roughly $50 – $240 in permit fees, plan on 3 business days for approval, plus you can apply online.

By Joey, Founder · Last verified March 29, 2026 · How we research →

Population: 256,684 Code: 2021 Verified: 2026-03-29 5 local rules

When you don’t need a Fence permit in Irving

Exempt·Rule 1

Standard residential fences 6 feet or under do not require a building permit.

SourceIrving Building Code
Exempt·Rule 2

Backyard fences up to 8 feet typically do not require a permit.

SourceIrving Building Code

When you need a Fence permit in Irving

Required·Rule 1

Fences over 8 feet require a building permit and may need engineered plans.

Estimated Fee$50 – $240
Typical Timeline3 business days
SourceIrving Building Code
Required·Rule 2

Masonry or stone fences typically require a building permit due to foundation requirements.

Estimated Fee$70 – $285
Typical Timelineabout 2 weeks
SourceIrving Building Code
Required·Rule 3

Pool barrier fencing must comply with city pool barrier ordinances and may require inspection.

Estimated Fee$50 – $140
Typical Timeline3 business days
SourceIrving Building Code

What Makes Irving Different

Here's how Irving's fence / gate rules stack up against the standard IRC baseline that most of the country follows.

Stricter Than the IRC

Irving drops the height feet threshold to 6 feet. The IRC allows up to 7 feet before requiring a permit.

Fences over 8 feet require a building permit and may need engineered plans.

Masonry or stone fences typically require a building permit due to foundation requirements.

More Lenient Than the IRC

Irving sets the height feet threshold at 8 feet, the IRC standard is 7 feet. That gives you more room before a permit kicks in.

1 rule match the IRC baseline, no surprises there.

Fence / Gate Permit Costs: Irving vs. Nearby

Irving's fees are right in line with the Texas average, $50 – $285 versus $48 – $174 statewide.

CityEstimated Fee
Irving $50 – $285
Houston $50 – $250
San Antonio $40 – $210
Dallas $50 – $300

Fees shown are estimates based on local building code data. Actual fees may vary based on project scope and valuation. See all Irving permit costs →

Zoning & HOA Considerations

Zoning

Front-yard fences and fences above certain heights may require zoning approval. Many cities limit front-yard fence height to 3–4 feet. Check setback and height limits with your planning department.

HOA Communities

If you live in an HOA community: hOAs frequently restrict fence materials, colors, heights, and styles, often more strictly than city code. Review your CC&Rs and submit to your Architectural Review Committee (ARC) before applying for a city permit.

Estimated Project Timeline in Irving

Here's a typical timeline for a fence / gate project in Irving, TX:

Week 1
Get quotes & finalize design
Contact licensed contractors, get 3+ quotes, finalize project scope and drawings (plan drawings required).
Week 2
Prepare permit documents
Contractor prepares site plan, construction drawings, and permit application. Gather required documents per your city's checklist.
Week 3
Submit permit application
Your contractor submits the application to Irving's building department, apply online here.
Week 4-5
Plan review & approval
Typical processing time in Irving: about 2 weeks. Plan review examiner checks drawings for code compliance.
Week 6+
Construction & inspections
Post the permit card on site. Work begins. Schedule inspections at required stages (varies by project). Final inspection required before closing the permit.

Timeline is based on Irving's typical about 2 weeks permit processing time. Actual timelines vary by project complexity, completeness of application, and current department workload.

Need a Fence permit in Irving, TX?

Answer a few quick questions for a personalized answer about your specific project.

Check Now, Free →

Building Department Contact

NameBuilding Inspections Division
Address825 W Irving Blvd, 2nd Floor, Irving, TX 75060
HoursMon-Fri 8am-5pm

Frequently Asked Questions

Estimated permit fees for Fence / Gate projects in Irving, TX range from $50 – $285. Fees vary based on project scope and valuation.

It depends on the specifics of your project. Some smaller Fence / Gate projects may be exempt from permit requirements, while larger ones typically require a permit. Use our free lookup tool to check your specific situation.

Working without a required permit in Irving can result in fines, stop-work orders, being required to remove completed work, and complications when selling your home. It's always best to check first.

Typical approval time for Fence / Gate permits in Irving is 3 business days. More complex projects may take longer if plan review is required.

If you live in an HOA community, you may need architectural review approval in addition to a building permit. HOA rules and city building codes are separate, you may need to satisfy both. Review your CC&Rs and submit to your HOA's architectural review committee before starting work.

Learn More About Fence / Gate Permits

Read our complete guide covering permit requirements, costs, common exemptions, and the application process.

Read Fence / Gate Guide →

Estimate your permit fees →

Disclaimer: This information was last verified on 2026-03-29. Building permit requirements may change. Zoning requirements (setbacks, lot coverage, height limits) are separate and vary by location. Always confirm with your local building and planning departments before starting your project. PermitMint provides general guidance, not legal advice.