Building Permit Cost in Aurora, IL (2026)

Typical residential building permits in Aurora run $25–$5,000, 486% above the Illinois state average. Fees vary by project type, scope, and declared valuation.

By Joey, Founder · Last verified March 29, 2026 · How we research →

The short answer

Expect $25–$5,000 for most residential permits in Aurora. That's 486% above the Illinois state average of $167–$691.

Simple swaps (water heaters, EV chargers, like-for-like HVAC) usually run under $200. Additions, pools, and kitchen remodels are the expensive end. Confirm current rates with Building Division at (630) 256-3130.

Permit fees by project type in Aurora

Each row shows the estimated fee range for that project type in Aurora, the typical approval timeline, and how it compares to the Illinois state average.

Project Est. fee in Aurora vs state avg Typical timeline
Deck / Patio $85 – $680 +21% about 4 weeks
Fence / Gate $64 – $212 in line about 2 weeks
Shed / Outbuilding $85 – $425 +27% about 2 weeks
Roof Replacement $128 – $680 in line about 3 weeks
Window / Door $85 – $340 in line about 2 weeks
Bathroom Remodel $128 – $850 +44% about 3 weeks
Kitchen Remodel $128 – $510 in line about 3 weeks
Swimming Pool / Hot Tub $128 – $1,275 +57% about 4 weeks
Electrical Work $64 – $680 +40% about 2 weeks
Plumbing Work $42 – $340 +17% about 2 weeks
HVAC / Furnace $64 – $850 +76% about 3 weeks
Garage / Carport $205 – $1,275 +24% about 4 weeks
Room Addition $340 – $4,250 +50% about 6 weeks
Basement Finishing $128 – $1,020 +20% about 3 weeks
Retaining Wall $128 – $510 in line about 3 weeks
Solar Panels $150 – $500 in line about 4 weeks
Patio / Hardscape $100 – $500 in line about 2 weeks
ADU / Guest House $500 – $5,000 +15% about 6 weeks
Driveway / Paving $75 – $500 +13% about 3 weeks
Demolition $100 – $1,000 +18% about 3 weeks
EV Charger $75 – $500 +29% about 3 weeks
Generator $75 – $1,500 +58% about 4 weeks
Gas Line $50 – $400 +13% about 2 weeks
Water Heater $25 – $500 +10% about 2 weeks
Tree Removal $25 – $500 +36% about 3 weeks
Siding $100 – $800 +12% about 2 weeks
Fireplace / Wood Stove $75 – $800 +46% about 2 weeks
Concrete Slab $75 – $600 +19% about 2 weeks

Fees are estimates based on Aurora's rule data and may not include sub-permits (electrical, plumbing, mechanical) required for larger projects. The "vs state avg" column compares the midpoint of each range to the Illinois statewide average for the same project type.

How Aurora's permit fees are structured

Most city permit fees break down into four buckets. The exact split varies, but these proportions hold across most US jurisdictions we track.

Building permit fee~55% of total
Plan review fee~30% of total
Inspection / processingremainder
Technology / records fee$5–$15 flat

View Aurora's official fee schedule →

Aurora vs state vs national averages

Midpoint of the estimated range for a typical residential permit.

Aurora (this city) $25–$5,000
Illinois state avg $167–$691
National avg (1,500+ cities) $165–$699

How to reduce your permit cost in Aurora

  • Ask about over-the-counter permits. Many jurisdictions issue same-day permits for simple projects (water heater swap, like-for-like windows, small sheds). Saves a full plan-review cycle.
  • Pull the permit yourself. Owner-builder permits are usually the same fee as contractor permits, minus the contractor markup. Most cities (including Aurora where owner-builder is allowed) let homeowners file directly.
  • Submit complete plans the first time. Resubmittals often trigger a re-review fee. A clean first submittal is typically the single biggest driver of cost and timeline.
  • Check if your project is exempt. Small fences, low decks, minor electrical, and like-for-like appliance swaps are often permit-exempt. Use our free lookup tool to check your specific project before assuming you need one.
  • Bundle related work. If you're doing multiple upgrades, applying for them together is usually cheaper than separate permits, because plan review and inspection fees are often priced per-visit.

Who to call in Aurora

DepartmentBuilding Division
Address77 S Broadway, 1st Floor, Aurora, IL 60505
HoursMon-Fri 8am-5pm

Check if your project needs a permit in Aurora

Free instant answer with the municipal code section cited.

Check permit requirements All Aurora rules

Frequently asked questions

How much does a building permit cost in Aurora, IL?

Most residential building permits in Aurora run $25–$5,000, depending on the project type and valuation. Simple permits like water heater replacements can be under $100, while additions and pool permits run into the low thousands.

Why are permit fees different in Aurora than other cities?

Every city sets its own fee schedule. Fees typically scale with project valuation and cover building-permit review, plan review, inspections, and a small technology or records fee. Aurora publishes its fees separately from surrounding jurisdictions, so the same project can cost materially more or less one town over.

Do I have to pay the permit fee even if the city denies the permit?

Most jurisdictions charge a non-refundable plan-review fee at submission, which stays with the city even if the permit is ultimately denied. The balance (permit issuance and inspection fees) is typically refunded or never collected. Confirm with Building Division before you file.

Can the permit fee go up after I apply?

Yes. Most cities recalculate fees once plan review is complete if the declared project valuation changes, or if additional sub-permits (electrical, plumbing, mechanical) are required. Budget for a 10–15% buffer over the estimate.

Is there a way to lower my Aurora permit cost?

A few practical options: file for an over-the-counter permit if your project qualifies, submit complete plans the first time to avoid resubmittal fees, pull the permit yourself instead of paying a contractor's markup, and check whether your project is exempt (small sheds, low fences, like-for-like water heater swaps often are).

Disclaimer: Fee estimates are based on Aurora's published rule data as of March 29, 2026. Actual fees may vary based on project valuation, sub-permits required, and city schedule updates. Always confirm current fees with Building Division before budgeting.