Fireplace Permit Requirements in El Paso County, CO
Pikes Peak Regional Building Department (PPRBD) is the building authority for unincorporated El Paso County and several incorporated cities in the region (Colorado Springs, Fountain, Woodland Park, Manitou Springs, Monument, Green Mountain Falls, Palmer Lake). PPRBD reviews plans, issues permits, and performs inspections for building, electrical, mechanical, plumbing, gas, and roofing across the entire region. Codes in force: 2023 Pikes Peak Regional Building Code (PPRBC), based on 2021 IRC with local amendments effective June 30, 2023. Local amendments include 42 psf ground snow load, 30 inch frost depth, Climate Zone 5 insulation (R-49 attic / R-20 walls per 2021 IECC), ASCE 7-16 wind design, Wildland-Urban Interface (WUI) Class A roof and ignition-resistant siding for Black Forest and Falcon areas, and radon-resistant construction per IRC Appendix F. PPRBD uses a valuation-based fee calculator at pprbd.org/Information/FeeCalculator rather than published flat fees. North office at 3939 Cordera Crest Avenue, Colorado Springs, CO 80924. Septic / OWTS permits handled by El Paso County Public Health at (719) 578-3199. Zoning, ADU verification, and driveway access on county roads handled by El Paso County Planning and Community Development at (719) 520-6300. Plumber and electrician licensing by Colorado DORA. Owner-builder permits allowed for owner-occupied primary residence.
By Joey, Founder · Last verified April 20, 2026 · How we research →
When you don’t need a Fireplace permit in El Paso County
An electric fireplace that plugs into an existing outlet does not require a permit. A hardwired electric fireplace requires an electrical permit from PPRBD.
When you need a Fireplace permit in El Paso County
Installing a gas fireplace insert requires a mechanical permit from PPRBD. A PPRBD-registered gas or mechanical contractor is required and venting must meet 2023 PPRBC G2427.
Installing a wood stove or wood-burning fireplace requires building and mechanical permits from PPRBD. Hearth pad, clearances to combustibles, and chimney requirements per 2023 PPRBC R1001 and R1003.9 apply (chimney must extend at least 3 feet above roof penetration and 2 feet above any roof within 10 feet). EPA-certified appliances are required. Note: along the Front Range, new wood-burning installs are restricted in some areas; verify allowance with PPRBD.
Fireplace Permit Costs: El Paso County vs. Nearby
| City | Estimated Fee |
|---|---|
| El Paso County | N/A |
| Denver | $75 – $800 |
| Colorado Springs | $75 – $800 |
| Aurora | $150 – $600 |
Fees shown are estimates based on local building code data. Actual fees may vary based on project scope and valuation. See all El Paso County permit costs →
Zoning & HOA Considerations
Fireplace and wood stove installations rarely trigger zoning review. Many California air quality districts (SCAQMD, BAAQMD) prohibit NEW wood-burning fireplaces in new construction. Chimney height requirements must comply with IRC R1003.9 (3 ft above roof penetration, 2 ft above any point within 10 ft horizontally).
If you live in an HOA community: hOAs in some communities prohibit wood-burning appliances entirely due to smoke and air quality concerns. Gas fireplaces are usually permitted. Chimney caps and exterior venting may face aesthetic review.
Estimated Project Timeline in El Paso County
Here's a typical timeline for a fireplace project in El Paso County, CO:
Timeline is based on El Paso County's typical about 2 weeks permit processing time. Actual timelines vary by project complexity, completeness of application, and current department workload.
Need a Fireplace permit in El Paso County, CO?
Answer a few quick questions for a personalized answer about your specific project.
Check Now, Free →Building Department Contact
Frequently Asked Questions
Contact El Paso County's building department for current Fireplace permit fee information. Fees typically vary based on project scope and valuation.
It depends on the specifics of your project. Some smaller Fireplace projects may be exempt from permit requirements, while larger ones typically require a permit. Use our free lookup tool to check your specific situation.
Working without a required permit in El Paso County can result in fines, stop-work orders, being required to remove completed work, and complications when selling your home. It's always best to check first.
Typical approval time for Fireplace permits in El Paso County is about 2 weeks. More complex projects may take longer if plan review is required.
If you live in an HOA community, you may need architectural review approval in addition to a building permit. HOA rules and city building codes are separate, you may need to satisfy both. Review your CC&Rs and submit to your HOA's architectural review committee before starting work.
Learn More About Fireplace Permits
Read our complete guide covering permit requirements, costs, common exemptions, and the application process.
Read Fireplace Guide →