Fireplace / Wood Stove Permit Requirements in Aurora, CO
Uses 2021 I-Codes with local amendments (Aurora Municipal Code Ch. 22). High altitude (5,471 ft), HVAC derating required. Spans Arapahoe, Adams, and Douglas counties. Aurora4Biz portal for permits. Flat-rate permits available for simple jobs. Email: permitcounter@auroragov.org
By Joey, Founder · Last verified March 29, 2026 · How we research →
When you don’t need a permit
Installing a decorative vent-free gas log set into an existing masonry fireplace (with no new gas piping) is generally exempt from a permit under City of Aurora Building Code / 2021 IRC with Colorado Amendments. The gas shutoff must already exist at the hearth. Vent-free units must be listed per ANSI Z21.11.2 and not used in bedrooms.
When you do need a permit
Installing a new gas fireplace insert into an existing masonry opening (using existing gas line) requires a mechanical permit under City of Aurora Building Code / 2021 IRC with Colorado Amendments. The unit must be listed per ANSI Z21.50 and installed per manufacturer instructions. A gas pressure test is required.
New wood-burning fireplace construction requires both a building permit and a mechanical permit under City of Aurora Building Code / 2021 IRC with Colorado Amendments. Work must comply with IRC Chapter 10 (Chimneys and Fireplaces) including foundation, firebox, hearth, and chimney requirements. The 2-10-3 rule applies to chimney height.
Installing a gas fireplace with a new gas line extension requires building, mechanical, and plumbing permits under City of Aurora Building Code / 2021 IRC with Colorado Amendments. A licensed plumber must install the gas piping; a licensed HVAC/mechanical contractor must install the appliance. Separate inspections are required for gas piping and the final mechanical installation.
Fireplace / Wood Stove Permit Costs: Aurora vs. Nearby
Aurora's fees are right in line with the Colorado average, $150 – $600 versus $133 – $476 statewide.
| City | Estimated Fee |
|---|---|
| Aurora | $150 – $600 |
| Denver | $75 – $800 |
| Colorado Springs | $75 – $800 |
| Fort Collins | $75 – $800 |
Fees shown are estimates based on local building code data. Actual fees may vary based on project scope and valuation. See all Aurora permit costs →
Zoning & HOA Considerations
Fireplace and wood stove installations rarely trigger zoning review. Many California air quality districts (SCAQMD, BAAQMD) prohibit NEW wood-burning fireplaces in new construction. Chimney height requirements must comply with IRC R1003.9 (3 ft above roof penetration, 2 ft above any point within 10 ft horizontally).
If you live in an HOA community: hOAs in some communities prohibit wood-burning appliances entirely due to smoke and air quality concerns. Gas fireplaces are usually permitted. Chimney caps and exterior venting may face aesthetic review.
Estimated Project Timeline in Aurora
Here's a typical timeline for a fireplace / wood stove project in Aurora, CO:
Timeline is based on Aurora's typical about 3 weeks permit processing time. Actual timelines vary by project complexity, completeness of application, and current department workload.
Check your specific project
Answer a few quick questions to get a personalized answer for your exact project.
Check Now, Free →Building Department Contact
Frequently Asked Questions
Estimated permit fees for Fireplace / Wood Stove projects in Aurora, CO range from $150 – $600. Fees vary based on project scope and valuation.
It depends on the specifics of your project. Some smaller Fireplace / Wood Stove projects may be exempt from permit requirements, while larger ones typically require a permit. Use our free lookup tool to check your specific situation.
Working without a required permit in Aurora can result in fines, stop-work orders, being required to remove completed work, and complications when selling your home. It's always best to check first.
Typical approval time for Fireplace / Wood Stove permits in Aurora is about 2 weeks. More complex projects may take longer if plan review is required.
If you live in an HOA community, you may need architectural review approval in addition to a building permit. HOA rules and city building codes are separate, you may need to satisfy both. Review your CC&Rs and submit to your HOA's architectural review committee before starting work.
Learn More About Fireplace / Wood Stove Permits
Read our complete guide covering permit requirements, costs, common exemptions, and the application process.
Read Fireplace / Wood Stove Guide →