Electrical Work Permit Requirements in Aurora, CO

Uses 2021 I-Codes with local amendments (Aurora Municipal Code Ch. 22). High altitude (5,471 ft), HVAC derating required. Spans Arapahoe, Adams, and Douglas counties. Aurora4Biz portal for permits. Flat-rate permits available for simple jobs. Email: permitcounter@auroragov.org

By Joey, Founder · Last verified March 29, 2026 · How we research →

Population: 386,261 Code: 2021 Verified: 2026-03-29 4 local rules 1 people checked this

When you don’t need a Electrical permit in Aurora

Exempt·Rule 1

Replacing a fixture in-kind does not require a permit.

SourceAurora Municipal Code Ch. 22 / 2021 I-Codes with local amendments

When you need a Electrical permit in Aurora

Required·Rule 1

Adding circuits requires a permit.

Estimated Fee$70 – $270
Typical Timelineabout 2 weeks
SourceAurora Municipal Code Ch. 22 / 2021 I-Codes with local amendments
Required·Rule 2

Panel upgrades require a permit.

Estimated Fee$90 – $360
Typical Timelineabout 2 weeks
SourceAurora Municipal Code Ch. 22 / 2021 I-Codes with local amendments
Required·Rule 3

Rewiring requires permits.

Estimated Fee$225 – $720
Typical Timelineabout 2 weeks
SourceAurora Municipal Code Ch. 22 / 2021 I-Codes with local amendments

What Makes Aurora Different

Here's how Aurora's electrical work rules stack up against the standard IRC baseline that most of the country follows.

Stricter Than the IRC

Adding circuits requires a permit in Aurora, CO.

Panel upgrades require a permit in Aurora, CO.

Rewiring requires permits in Aurora, CO.

1 rule match the IRC baseline, no surprises there.

Electrical Work Permit Costs: Aurora vs. Nearby

Aurora comes in on the low side for Colorado. You're looking at $70 – $720 here, compared to the state average of $102 – $397.

CityEstimated Fee
Aurora $70 – $720
Denver $75 – $800
Colorado Springs $50 – $800
Fort Collins $50 – $800

Fees shown are estimates based on local building code data. Actual fees may vary based on project scope and valuation. See all Aurora permit costs →

Zoning & HOA Considerations

HOA Communities

If you live in an HOA community: interior electrical work rarely requires HOA approval. Exterior electrical additions (outdoor lighting, EV charger installations, visible conduit) may need architectural review in some communities.

Estimated Project Timeline in Aurora

Here's a typical timeline for a electrical work project in Aurora, CO:

Week 1
Get quotes & finalize design
Contact licensed contractors, get 3+ quotes, finalize project scope and drawings (plan drawings required).
Week 2
Prepare permit documents
Contractor prepares site plan, construction drawings, and permit application. Gather required documents per your city's checklist.
Week 3
Submit permit application
Your contractor submits the application to Aurora's building department, apply online here.
Week 4-5
Plan review & approval
Typical processing time in Aurora: about 2 weeks. Plan review examiner checks drawings for code compliance.
Week 6+
Construction & inspections
Post the permit card on site. Work begins. Schedule inspections at required stages (varies by project). Final inspection required before closing the permit.

Timeline is based on Aurora's typical about 2 weeks permit processing time. Actual timelines vary by project complexity, completeness of application, and current department workload.

Need an Electrical permit in Aurora, CO?

Answer a few quick questions for a personalized answer about your specific project.

Check Now, Free →

Building Department Contact

NameBuilding Division
Address15151 E. Alameda Pkwy., Suite 2400, Aurora, CO 80012
HoursMon/Tue/Thu/Fri 7:30am-4:30pm, Wed 8:30am-4:30pm

Frequently Asked Questions

Estimated permit fees for Electrical Work projects in Aurora, CO range from $70 – $720. Fees vary based on project scope and valuation.

It depends on the specifics of your project. Some smaller Electrical Work projects may be exempt from permit requirements, while larger ones typically require a permit. Use our free lookup tool to check your specific situation.

Working without a required permit in Aurora can result in fines, stop-work orders, being required to remove completed work, and complications when selling your home. It's always best to check first.

Typical approval time for Electrical Work permits in Aurora is about 2 weeks. More complex projects may take longer if plan review is required.

If you live in an HOA community, you may need architectural review approval in addition to a building permit. HOA rules and city building codes are separate, you may need to satisfy both. Review your CC&Rs and submit to your HOA's architectural review committee before starting work.

Learn More About Electrical Work Permits

Read our complete guide covering permit requirements, costs, common exemptions, and the application process.

Read Electrical Work Guide →

Estimate your permit fees →

Disclaimer: This information was last verified on 2026-03-29. Building permit requirements may change. Zoning requirements (setbacks, lot coverage, height limits) are separate and vary by location. Always confirm with your local building and planning departments before starting your project. PermitMint provides general guidance, not legal advice.