Concrete Slab Permit Requirements in Aurora, CO

Uses 2021 I-Codes with local amendments (Aurora Municipal Code Ch. 22). High altitude (5,471 ft), HVAC derating required. Spans Arapahoe, Adams, and Douglas counties. Aurora4Biz portal for permits. Flat-rate permits available for simple jobs. Email: permitcounter@auroragov.org

By Joey, Founder · Last verified March 29, 2026 · How we research →

Population: 386,261 Code: 2021 Verified: 2026-03-29 3 local rules

When you don’t need a permit

Exempt·Rule 1

Small at-grade patio slabs under 200 square feet not exceeding 30 inches above adjacent grade are typically exempt from a building permit per City of Aurora Building Code / 2021 IRC with Colorado Amendments exemptions (IRC R105.2 basis). The slab must not be part of an accessible route or support a structure.

SourceCity of Aurora Building Code / 2021 IRC with Colorado Amendments · view source

When you do need a permit

Required·Rule 1

Freestanding concrete slabs over 200 square feet require a building permit under City of Aurora Building Code / 2021 IRC with Colorado Amendments. This includes large driveways, basketball courts, and workshop pads. Plans must address drainage and setbacks.

Estimated Fee$150 – $480
Typical TimelineAbout 2 weeks
SourceCity of Aurora Building Code / 2021 IRC with Colorado Amendments · view source
Required·Rule 2

Structural concrete slabs attached to or supporting a building, including house foundation slabs, garage slabs, and covered-patio structural slabs, require a building permit under City of Aurora Building Code / 2021 IRC with Colorado Amendments. Plans must show reinforcing, drainage, and footing details.

Estimated Fee$150 – $600
Typical TimelineAbout 2 weeks
SourceCity of Aurora Building Code / 2021 IRC with Colorado Amendments · view source

Concrete Slab Permit Costs: Aurora vs. Nearby

Aurora runs higher than average for Colorado. Expect $150 – $600 versus the state average of $109 – $468.

CityEstimated Fee
Aurora $150 – $600
Denver $75 – $300
Denver $100 – $500
Denver $150 – $600

Fees shown are estimates based on local building code data. Actual fees may vary based on project scope and valuation.

Zoning & HOA Considerations

Zoning

Concrete slabs contribute to impervious surface coverage. Austin, Portland, Seattle, and many coastal cities cap impervious cover at 40-65% of lot area. Sidewalks and curb cuts in the public right-of-way always require a separate Public Works encroachment permit.

HOA Communities

If you live in an HOA community: hOAs may restrict new concrete installations, especially front-yard additions visible from the street. Changes to driveway width or walkway placement typically need ARC approval.

Estimated Project Timeline in Aurora

Here's a typical timeline for a concrete slab project in Aurora, CO:

Week 1
Get quotes & finalize design
Contact licensed contractors, get 3+ quotes, finalize project scope and drawings (plan drawings required).
Week 2
Prepare permit documents
Contractor prepares site plan, construction drawings, and permit application. Gather required documents per your city's checklist.
Week 3
Submit permit application
Your contractor submits the application to Aurora's building department, apply online here.
Week 4-5
Plan review & approval
Typical processing time in Aurora: About 2 weeks. Plan review examiner checks drawings for code compliance.
Week 6+
Construction & inspections
Post the permit card on site. Work begins. Schedule inspections at required stages (varies by project). Final inspection required before closing the permit.

Timeline is based on Aurora's typical About 2 weeks permit processing time. Actual timelines vary by project complexity, completeness of application, and current department workload.

Check your specific project

Answer a few quick questions to get a personalized answer for your exact project.

Check Now, Free →

Building Department Contact

NameBuilding Division
Address15151 E. Alameda Pkwy., Suite 2400, Aurora, CO 80012
HoursMon/Tue/Thu/Fri 7:30am-4:30pm, Wed 8:30am-4:30pm

Frequently Asked Questions

Estimated permit fees for Concrete Slab projects in Aurora, CO range from $150 – $480. Fees vary based on project scope and valuation.

It depends on the specifics of your project. Some smaller Concrete Slab projects may be exempt from permit requirements, while larger ones typically require a permit. Use our free lookup tool to check your specific situation.

Working without a required permit in Aurora can result in fines, stop-work orders, being required to remove completed work, and complications when selling your home. It's always best to check first.

Typical approval time for Concrete Slab permits in Aurora is About 2 weeks. More complex projects may take longer if plan review is required.

If you live in an HOA community, you may need architectural review approval in addition to a building permit. HOA rules and city building codes are separate, you may need to satisfy both. Review your CC&Rs and submit to your HOA's architectural review committee before starting work.

Learn More About Concrete Slab Permits

Read our complete guide covering permit requirements, costs, common exemptions, and the application process.

Read Concrete Slab Guide →

Estimate your permit fees →

Disclaimer: This information was last verified on 2026-03-29. Building permit requirements may change. Zoning requirements (setbacks, lot coverage, height limits) are separate and vary by location. Always confirm with your local building and planning departments before starting your project. PermitMint provides general guidance, not legal advice.