Concrete Slab Permit Requirements in Beverly Hills, CA
Beverly Hills enforces the 2022 California Residential Code (2021 IRC with CA amendments) via the Beverly Hills Municipal Code. Permits are handled by the Community Development Department (CDD). Beverly Hills is known for stricter-than-typical design review, historic preservation, and neighborhood compatibility requirements — projects visible from the public right-of-way often require a Design Review Commission sign-off in addition to the standard building permit. Contractors must be licensed with the CA Contractors State License Board; owner-builder permits are allowed for primary residences. Many simple residential permits can be applied for online via the city's Accela-powered portal.
By Joey, Founder · Last verified April 16, 2026 · How we research →
When you don’t need a Concrete Slab permit in Beverly Hills
Small at-grade patio slabs under 120 square feet are typically exempt from building permits per IRC R105.2 (extended via local amendment). The slab must be at-grade (not more than 30 inches above adjacent grade) and not part of an accessible route.
When you need a Concrete Slab permit in Beverly Hills
Concrete slabs over 200 square feet typically require a building permit. The permit ensures compliance with IRC R506 (slab design), proper drainage, and impervious surface limits where applicable.
Any slab elevated more than 30 inches above adjacent grade requires a building permit. The IRC R105.2 exemption only applies to sidewalks and driveways at or near grade level. Elevated slabs are treated as structural elements and may require footings, guard rails (36 inches minimum per IRC R312.1 for walking surfaces 30+ inches above grade), and engineering review.
Any concrete work in the public right-of-way (sidewalks, curb cuts, driveway approaches) ALWAYS requires a permit from Public Works or the Transportation department, not the building department. This applies even if you're replacing an existing damaged sidewalk in front of your own house. The permit ensures ADA compliance, proper slope, and coordination with existing public infrastructure.
Concrete Slab Permit Costs: Beverly Hills vs. Nearby
Beverly Hills comes in on the low side for California. You're looking at $86 – $690 here, compared to the state average of $109 – $469.
| City | Estimated Fee |
|---|---|
| Beverly Hills | $86 – $690 |
| Los Angeles | $75 – $600 |
| Sacramento County | $75 – $600 |
| San Diego | $75 – $600 |
Fees shown are estimates based on local building code data. Actual fees may vary based on project scope and valuation. See all Beverly Hills permit costs →
Zoning & HOA Considerations
Concrete slabs contribute to impervious surface coverage. Austin, Portland, Seattle, and many coastal cities cap impervious cover at 40-65% of lot area. Sidewalks and curb cuts in the public right-of-way always require a separate Public Works encroachment permit.
If you live in an HOA community: hOAs may restrict new concrete installations, especially front-yard additions visible from the street. Changes to driveway width or walkway placement typically need ARC approval.
Estimated Project Timeline in Beverly Hills
Here's a typical timeline for a concrete slab project in Beverly Hills, CA:
Timeline is based on Beverly Hills's typical about 2 weeks permit processing time. Actual timelines vary by project complexity, completeness of application, and current department workload.
Need a Concrete Slab permit in Beverly Hills, CA?
Answer a few quick questions for a personalized answer about your specific project.
Check Now, Free →Building Department Contact
Frequently Asked Questions
Estimated permit fees for Concrete Slab projects in Beverly Hills, CA range from $86 – $690. Fees vary based on project scope and valuation.
It depends on the specifics of your project. Some smaller Concrete Slab projects may be exempt from permit requirements, while larger ones typically require a permit. Use our free lookup tool to check your specific situation.
Working without a required permit in Beverly Hills can result in fines, stop-work orders, being required to remove completed work, and complications when selling your home. It's always best to check first.
Typical approval time for Concrete Slab permits in Beverly Hills is 5 business days. More complex projects may take longer if plan review is required.
If you live in an HOA community, you may need architectural review approval in addition to a building permit. HOA rules and city building codes are separate, you may need to satisfy both. Review your CC&Rs and submit to your HOA's architectural review committee before starting work.
Learn More About Concrete Slab Permits
Read our complete guide covering permit requirements, costs, common exemptions, and the application process.
Read Concrete Slab Guide →