Concrete Slab Permit Requirements in Antioch, CA
Antioch is a city of 117,096 residents in California that follows the 2022 CBC IRC. Antioch's building department is stricter than the standard IRC on concrete slab work, expect fewer exemptions and more situations that require a permit. You're looking at roughly $150 – $480 in permit fees, plan on about 2 weeks for approval, plus you can apply online.
By Joey, Founder · Last verified March 29, 2026 · How we research →
When you don’t need a Concrete Slab permit
Small at-grade patio slabs under 200 square feet not exceeding 30 inches above adjacent grade are typically exempt from a building permit per California Building Code (CBC) Title 24 / 2022 CRC / City of Antioch Community Development exemptions (IRC R105.2 basis). The slab must not be part of an accessible route or support a structure.
When you need a Concrete Slab permit
Freestanding concrete slabs over 200 square feet require a building permit under California Building Code (CBC) Title 24 / 2022 CRC / City of Antioch Community Development. This includes large driveways, basketball courts, and workshop pads. Plans must address drainage and setbacks.
Structural concrete slabs attached to or supporting a building, including house foundation slabs, garage slabs, and covered-patio structural slabs, require a building permit under California Building Code (CBC) Title 24 / 2022 CRC / City of Antioch Community Development. Plans must show reinforcing, drainage, and footing details.
Concrete Slab Permit Costs: Antioch vs. Nearby
Antioch runs higher than average for California. Expect $150 – $600 versus the state average of $109 – $468.
| City | Estimated Fee |
|---|---|
| Antioch | $150 – $600 |
| Los Angeles | $75 – $600 |
| Sacramento County | $75 – $600 |
| San Diego | $75 – $600 |
Fees shown are estimates based on local building code data. Actual fees may vary based on project scope and valuation. See all Antioch permit costs →
Zoning & HOA Considerations
Concrete slabs contribute to impervious surface coverage. Austin, Portland, Seattle, and many coastal cities cap impervious cover at 40-65% of lot area. Sidewalks and curb cuts in the public right-of-way always require a separate Public Works encroachment permit.
If you live in an HOA community: hOAs may restrict new concrete installations, especially front-yard additions visible from the street. Changes to driveway width or walkway placement typically need ARC approval.
Estimated Project Timeline
Here's a typical timeline for a concrete slab project:
Timeline is based on the typical about 2 weeks permit processing time. Actual timelines vary by project complexity, completeness of application, and current department workload.
Need a Concrete Slab permit?
Answer a few quick questions for a personalized answer about your specific project.
Check Now, Free →Building Department Contact
Frequently Asked Questions
Estimated permit fees for Concrete Slab projects range from $150 – $600. Fees vary based on project scope and valuation.
It depends on the specifics of your project. Some smaller Concrete Slab projects may be exempt from permit requirements, while larger ones typically require a permit. Use our free lookup tool to check your specific situation.
Working without a required permit can result in fines, stop-work orders, being required to remove completed work, and complications when selling your home. It's always best to check first.
Typical approval time for Concrete Slab permits is about 2 weeks. More complex projects may take longer if plan review is required.
If you live in an HOA community, you may need architectural review approval in addition to a building permit. HOA rules and city building codes are separate, you may need to satisfy both. Review your CC&Rs and submit to your HOA's architectural review committee before starting work.
Learn More About Concrete Slab Permits
Read our complete guide covering permit requirements, costs, common exemptions, and the application process.
Read Concrete Slab Guide →