Generator Permit Requirements in Hensley, AR
Hensley is an unincorporated census-designated place (CDP) in southern Pulaski County, AR, south of Little Rock. AHJ for the Hensley CDP itself is Pulaski County Planning & Development. Note: ZIP 72065 spans 3 counties (primarily Saline, with portions in Pulaski and Grant), so addresses on the Saline or Grant side fall under those county jurisdictions instead. Pulaski County permitting focus is planning/zoning, subdivision, floodplain, stormwater, and Lake Maumelle Watershed building; full residential building inspection in unincorporated areas defers to Arkansas Fire Prevention Code (2021 IRC, Vol. III). Saline River and tributaries cross this area (despite the Pulaski County name); confirm floodplain status before any work. Semi-rural; ASCE 7 wind region typical of central Arkansas. Interim Director Jim Cranor as of 2026.
By Joey, Founder · Last verified May 23, 2026 · How we research →
When you don’t need a Generator permit in Hensley
AR (Pulaski County jurisdiction), portable generators do not require a permit. However, a transfer switch must be installed by an AR licensed electrical contractor to prevent backfeed to the utility grid. NOTE: ZIP 72065 spans 3 counties (primarily Saline, with portions in Pulaski and Grant). The Hensley CDP itself is in Pulaski County, so Pulaski County is the AHJ for the named community; addresses on the Saline or Grant side fall under those county jurisdictions.
When you need a Generator permit in Hensley
AR (Pulaski County jurisdiction), a permanent standby generator requires an electrical permit. AR requires a licensed electrical contractor per AR state licensing for this work. A gas line permit may also be required if fueled by natural gas or propane. NOTE: ZIP 72065 spans 3 counties (primarily Saline, with portions in Pulaski and Grant). The Hensley CDP itself is in Pulaski County, so Pulaski County is the AHJ for the named community; addresses on the Saline or Grant side fall under those county jurisdictions.
Generator Permit Costs: Hensley vs. Nearby
| City | Estimated Fee |
|---|---|
| Hensley | N/A |
| Little Rock | $75 – $1,500 |
| Fayetteville | $75 – $1,500 |
| Springdale | $75 – $1,500 |
Fees shown are estimates based on local building code data. Actual fees may vary based on project scope and valuation. See all Hensley permit costs →
Zoning Considerations
Standby generators are subject to setback requirements, typically 5 feet from any building opening (NFPA 37) and 3+ feet from property lines. Some jurisdictions require site plan review showing generator placement. Noise ordinances (typically 55-65 dBA daytime, 45-55 dBA nighttime) may affect placement.
Estimated Project Timeline in Hensley
Here's a typical timeline for a generator project in Hensley, AR:
Timeline is based on Hensley's typical about 2 weeks permit processing time. Actual timelines vary by project complexity, completeness of application, and current department workload.
Need a Generator permit in Hensley, AR?
Answer a few quick questions for a personalized answer about your specific project.
Check Now, Free →Building Department Contact
Frequently Asked Questions
Contact Hensley's building department for current Generator permit fee information. Fees typically vary based on project scope and valuation.
It depends on the specifics of your project. Some smaller Generator projects may be exempt from permit requirements, while larger ones typically require a permit. Use our free lookup tool to check your specific situation.
Working without a required permit in Hensley can result in fines, stop-work orders, being required to remove completed work, and complications when selling your home. It's always best to check first.
Typical approval time for Generator permits in Hensley is about 2 weeks. More complex projects may take longer if plan review is required.
Learn More About Generator Permits
Read our complete guide covering permit requirements, costs, common exemptions, and the application process.
Read Generator Guide →