Fireplace Permit Requirements in Hensley, AR
Hensley is an unincorporated census-designated place (CDP) in southern Pulaski County, AR, south of Little Rock. AHJ for the Hensley CDP itself is Pulaski County Planning & Development. Note: ZIP 72065 spans 3 counties (primarily Saline, with portions in Pulaski and Grant), so addresses on the Saline or Grant side fall under those county jurisdictions instead. Pulaski County permitting focus is planning/zoning, subdivision, floodplain, stormwater, and Lake Maumelle Watershed building; full residential building inspection in unincorporated areas defers to Arkansas Fire Prevention Code (2021 IRC, Vol. III). Saline River and tributaries cross this area (despite the Pulaski County name); confirm floodplain status before any work. Semi-rural; ASCE 7 wind region typical of central Arkansas. Interim Director Jim Cranor as of 2026.
By Joey, Founder · Last verified May 23, 2026 · How we research →
When you don’t need a Fireplace permit in Hensley
AR (Pulaski County jurisdiction), installing an electric fireplace insert that plugs into an existing outlet does not require a permit. No venting or gas work is involved. NOTE: ZIP 72065 spans 3 counties (primarily Saline, with portions in Pulaski and Grant). The Hensley CDP itself is in Pulaski County, so Pulaski County is the AHJ for the named community; addresses on the Saline or Grant side fall under those county jurisdictions.
When you need a Fireplace permit in Hensley
AR (Pulaski County jurisdiction), installing a gas fireplace insert requires a mechanical permit for the gas line work and venting. AR requires a licensed mechanical contractor per AR state licensing for gas work. The installation must comply with IRC Chapter 24. NOTE: ZIP 72065 spans 3 counties (primarily Saline, with portions in Pulaski and Grant). The Hensley CDP itself is in Pulaski County, so Pulaski County is the AHJ for the named community; addresses on the Saline or Grant side fall under those county jurisdictions.
AR (Pulaski County jurisdiction), installing a new wood-burning fireplace or stove requires a building permit. The chimney must meet IRC Chapter 10 requirements. Clearances to combustibles must comply with the manufacturer's listing. NOTE: ZIP 72065 spans 3 counties (primarily Saline, with portions in Pulaski and Grant). The Hensley CDP itself is in Pulaski County, so Pulaski County is the AHJ for the named community; addresses on the Saline or Grant side fall under those county jurisdictions.
Fireplace Permit Costs: Hensley vs. Nearby
| City | Estimated Fee |
|---|---|
| Hensley | N/A |
| Little Rock | $75 – $800 |
| Fayetteville | $75 – $800 |
| Springdale | $75 – $800 |
Fees shown are estimates based on local building code data. Actual fees may vary based on project scope and valuation. See all Hensley permit costs →
Zoning Considerations
Fireplace and wood stove installations rarely trigger zoning review. Many California air quality districts (SCAQMD, BAAQMD) prohibit NEW wood-burning fireplaces in new construction. Chimney height requirements must comply with IRC R1003.9 (3 ft above roof penetration, 2 ft above any point within 10 ft horizontally).
Estimated Project Timeline in Hensley
Here's a typical timeline for a fireplace project in Hensley, AR:
Timeline is based on Hensley's typical about 2 weeks permit processing time. Actual timelines vary by project complexity, completeness of application, and current department workload.
Need a Fireplace permit in Hensley, AR?
Answer a few quick questions for a personalized answer about your specific project.
Check Now, Free →Building Department Contact
Frequently Asked Questions
Contact Hensley's building department for current Fireplace permit fee information. Fees typically vary based on project scope and valuation.
It depends on the specifics of your project. Some smaller Fireplace projects may be exempt from permit requirements, while larger ones typically require a permit. Use our free lookup tool to check your specific situation.
Working without a required permit in Hensley can result in fines, stop-work orders, being required to remove completed work, and complications when selling your home. It's always best to check first.
Typical approval time for Fireplace permits in Hensley is about 1 week. More complex projects may take longer if plan review is required.
Learn More About Fireplace Permits
Read our complete guide covering permit requirements, costs, common exemptions, and the application process.
Read Fireplace Guide →