How to Get a Fence Permit in Long Beach, CA (2026 Guide)
Everything you need to know about fence permits in Long Beach, CA, local requirements, fees, timelines, and how to apply.
By Joey, Founder · Last updated May 15, 2026 · How we research →
Check your specific fence project
Get an instant, personalized answer for your exact project details in Long Beach.
Free Permit Lookup →Do You Need a Fence Permit in Long Beach?
Based on Long Beach's local building codes, you'll need a permit when:
Pool barrier fencing requires a building permit and must comply with CBC Section 3109 and Health & Safety Code §115920-115929. Pool fences must be at least 60 inches tall with self-closing, self-latching gates.
Fences exceeding 6 feet in height require a building permit. Taller fences may require engineering for wind loads and must comply with setback requirements. A zoning review may also be required.
Masonry (block or brick) fences and walls require a building permit regardless of height due to structural and seismic safety requirements in California. Foundation and reinforcement details must be reviewed.
These fence projects are typically exempt in Long Beach:
Fences in the rear yard not exceeding 6 feet in height are generally exempt from building permits per the California Building Code. Property line verification is recommended but no permit is typically needed.
Front yard fences are limited in height (typically 3.5 to 4 feet) and may be exempt from permits if they meet these height restrictions. Sight-line visibility requirements at corners and driveways must be maintained.
Permit Fees in Long Beach
Based on local Long Beach permit data, fees for fence projects typically range:
Here's how fees break down by project scope nationally:
| Project Scope | Typical Permit Fee |
|---|---|
| Simple residential fence (under 6 ft) | $25 – $150 |
| Front-yard or taller fence (6+ ft) | $50 – $200 |
| Masonry or engineered fence | $150 – $500+ |
| Pool barrier fence | $50 – $200 |
| Inspection fee (if separate from permit) | $25 – $85 |
| Structural engineering (masonry walls, if required) | $500 – $2,000+ (separate from permit) |
Fees are typically calculated based on estimated project value. Contact Development Services - Building and Safety for exact amounts.
How Long Does It Take?
In Long Beach, typical approval time for fence permits is about 2 weeks.
More complex projects requiring structural review or variances may take longer. Simple projects may qualify for expedited or over-the-counter review in some cases.
How to Apply for a Fence Permit in Long Beach
- 1 Check requirements: Use our free lookup tool or contact Development Services - Building and Safety to confirm your project needs a permit.
- 2 Gather documents: Prepare your application, site plan, construction drawings, and any other required documents.
- 3 Submit online: Long Beach accepts applications online at Development Services - Building and Safety.
- 4 Pay fees: Pay the applicable permit fees ($85 – $680).
- 5 Wait for approval: Your application will be reviewed by Long Beach plan reviewers. Typical turnaround is about 2 weeks.
- 6 Begin work: Once approved, post your permit visibly at the job site before starting work.
- 7 Schedule inspections: Call Development Services - Building and Safety at (562) 570-6651 to schedule required inspections at each phase of the project.
Long Beach Building Department Contact
Required Inspections in Long Beach
Most fence projects in Long Beach require inspections at each construction stage:
Post Hole / Footing Inspection, Hole depth (typically 1/3 to 1/2 of the above-ground post height, and below the frost line in cold climates), hole diameter (typically 3x the post width), bearing on undisturbed soil, correct post locations matching the approved site plan, and proper setback from property lines and easements.
Final Inspection, Overall height compliance with the approved plans, correct location and setbacks, structural integrity, proper gate operation, material compliance, 'good side out' compliance (if applicable), and general code compliance. For pool barrier fences: self-closing gates, self-latching mechanism at 54 inches, no climbable features, and no openings larger than 4 inches.
Schedule inspections with Development Services - Building and Safety at (562) 570-6651 at least 24–48 hours in advance.
Frequently Asked Questions
Whether you need a permit depends on the size and scope of your fence project. In Long Beach, some smaller projects are exempt while larger ones require a permit. Use our free lookup tool to check your specific situation.
Permit fees for fence projects in Long Beach typically range from $85 – $680. Fees are usually based on the estimated project value.
Typical approval time in Long Beach is about 2 weeks. Complex projects requiring structural review may take longer.
In most cases, homeowners in Long Beach can pull permits and perform work on their own primary residence as an owner-builder. You're still responsible for meeting all code requirements and passing inspections.
Working without a required permit in Long Beach can result in fines, stop-work orders, required removal of completed work, and complications when selling your home.
Ready to check your fence project in Long Beach?
Use our free lookup tool to get a personalized answer based on your specific project details.
Free Permit Lookup →Other Permit Guides for Long Beach, CA
Explore more permit guides for Long Beach:
Fence Permits in Nearby Cities
See fence permit requirements in other California cities:
See Detailed Fence Rules for Long Beach
View all local rules, exemptions, and fee details on the permit page.
Fence Permit Rules →