How to Get a Deck Permit in Arlington, TX (2026 Guide)
Everything you need to know about deck permits in Arlington, TX, local requirements, fees, timelines, and how to apply.
By Joey, Founder · Last updated May 22, 2026 · How we research →
Check your specific deck project
Get an instant, personalized answer for your exact project details in Arlington.
Free Permit Lookup →Do You Need a Deck Permit in Arlington?
Based on Arlington's local building codes, you'll need a permit when:
Attached decks require a building permit even when 30 inches or less above grade due to structural attachment to the home.
Elevated decks over 30 inches above grade require a building permit regardless of attachment.
Large covered elevated decks require a building permit with engineered plans.
These deck projects are typically exempt in Arlington:
Freestanding decks 30 inches or less above grade are exempt from building permits.
Permit Fees in Arlington
Based on local Arlington permit data, fees for deck projects typically range:
Here's how fees break down by project scope nationally:
| Project Scope | Typical Permit Fee |
|---|---|
| Small deck (under 200 sq ft) | $75 – $250 |
| Medium deck (200–500 sq ft) | $200 – $500 |
| Large or multi-level deck (500+ sq ft) | $400 – $1,000+ |
| High-cost metros (SF, NYC, Seattle) | $500 – $1,500+ |
| Plan review fee (in addition to permit) | 50–65% of base permit fee |
| Re-inspection fee (per failed inspection) | $25 – $75 |
Fees are typically calculated based on estimated project value. Contact Building Inspections for exact amounts.
How Long Does It Take?
In Arlington, typical approval time for deck permits is 3 business days.
More complex projects requiring structural review or variances may take longer. Simple projects may qualify for expedited or over-the-counter review in some cases.
How to Apply for a Deck Permit in Arlington
- 1 Check requirements: Use our free lookup tool or contact Building Inspections to confirm your project needs a permit.
- 2 Gather documents: Prepare your application, site plan, construction drawings, and any other required documents.
- 3 Submit online: Arlington accepts applications online at Building Inspections.
- 4 Pay fees: Pay the applicable permit fees ($40 – $510).
- 5 Wait for approval: Your application will be reviewed by Arlington plan reviewers. Typical turnaround is 3 business days.
- 6 Begin work: Once approved, post your permit visibly at the job site before starting work.
- 7 Schedule inspections: Call Building Inspections at (817) 459-6502 to schedule required inspections at each phase of the project.
Arlington Building Department Contact
Required Inspections in Arlington
Most deck projects in Arlington require inspections at each construction stage:
Footing / Pier Inspection, Hole locations match approved plans, hole dimensions (diameter and depth) meet specifications, depth is below the local frost line, holes are clean and free of loose dirt or standing water, rebar or post brackets are positioned correctly if required, and soil conditions are adequate.
Framing Inspection, Ledger board attachment (correct fasteners, proper spacing, flashing installed), post-to-footing connections with approved connectors, beam and joist sizes and spans match approved plans, all joist hangers installed with every nail hole filled, guard rail posts properly connected to framing, stair stringers installed, correct hardware for treated lumber, and lateral bracing for freestanding decks over 30 inches.
Final Inspection, Guard rail height (minimum 36 inches), baluster spacing (maximum 4 inches, a 4-inch sphere cannot pass through), guard rail structural integrity (must resist 200 lb concentrated load), stair riser height (maximum 7-3/4 inches) and tread depth (minimum 10 inches) with uniform measurements, handrail height on stairs (34–38 inches) and graspability (1-1/4 to 2-inch diameter), landings at top and bottom of stairs, and overall completion matching the approved plans.
Schedule inspections with Building Inspections at (817) 459-6502 at least 24–48 hours in advance.
Frequently Asked Questions
Whether you need a permit depends on the size and scope of your deck project. In Arlington, some smaller projects are exempt while larger ones require a permit. Use our free lookup tool to check your specific situation.
Permit fees for deck projects in Arlington typically range from $40 – $510. Fees are usually based on the estimated project value.
Typical approval time in Arlington is 3 business days. Complex projects requiring structural review may take longer.
In most cases, homeowners in Arlington can pull permits and perform work on their own primary residence as an owner-builder. You're still responsible for meeting all code requirements and passing inspections.
Working without a required permit in Arlington can result in fines, stop-work orders, required removal of completed work, and complications when selling your home.
Ready to check your deck project in Arlington?
Use our free lookup tool to get a personalized answer based on your specific project details.
Free Permit Lookup →Other Permit Guides for Arlington, TX
Explore more permit guides for Arlington:
Deck Permits in Nearby Cities
See deck permit requirements in other Texas cities:
See Detailed Deck Rules for Arlington
View all local rules, exemptions, and fee details on the permit page.
Deck Permit Rules →