How to Get a Swimming Pool / Hot Tub Permit in Arvada, CO (2026 Guide)
Everything you need to know about swimming pool / hot tub permits in Arvada, CO — local requirements, fees, timelines, and how to apply.
Last updated: April 4, 2026
Check your specific swimming pool / hot tub project
Get an instant, personalized answer for your exact project details in Arvada.
Free Permit Lookup →Do You Need a Swimming Pool / Hot Tub Permit in Arvada?
Based on Arvada's local building codes, you'll need a permit when:
Above-ground pools deeper than 24 inches require a building permit and safety barrier.
Source: City of Arvada Code / 2018 IRC
In-ground pools require building, electrical, and plumbing permits.
Source: City of Arvada Code / 2018 IRC
Hot tub installations require an electrical permit.
Source: City of Arvada Code / 2018 IRC
These swimming pool / hot tub projects are typically exempt in Arvada:
Small above-ground pools (24 inches deep or less) do not require a building permit.
Source: City of Arvada Code / 2018 IRC
Permit Fees in Arvada
Based on local Arvada permit data, fees for swimming pool / hot tub projects typically range:
Here's how fees break down by project scope nationally:
| Project Scope | Typical Permit Fee |
|---|---|
| Above-ground pool permit | $50 – $300 |
| In-ground pool permit (standard) | $500 – $2,000 |
| In-ground pool with spa, electrical, and gas | $1,000 – $3,000+ |
| Electrical permit (pool equipment) | $50 – $500 |
| Fence/barrier permit | $50 – $500 |
| Plan review fee (may be separate) | $50 – $500 |
Fees are typically calculated based on estimated project value. Contact Building Services for exact amounts.
How Long Does It Take?
In Arvada, typical approval time for swimming pool / hot tub permits is About 2 weeks.
More complex projects requiring structural review or variances may take longer. Simple projects may qualify for expedited or over-the-counter review in some cases.
How to Apply for a Swimming Pool / Hot Tub Permit in Arvada
- 1 Check requirements: Use our free lookup tool or contact Building Services to confirm your project needs a permit.
- 2 Gather documents: Prepare your application, site plan, construction drawings, and any other required documents.
- 3 Submit online: Arvada accepts applications online at Building Services.
- 4 Pay fees: Pay the applicable permit fees ($50 – $1,425).
- 5 Wait for approval: Your application will be reviewed by Arvada plan reviewers. Typical turnaround is About 2 weeks.
- 6 Begin work: Once approved, post your permit visibly at the job site before starting work.
- 7 Schedule inspections: Call Building Services at (720) 898-7620 to schedule required inspections at each phase of the project.
Arvada Building Department Contact
Required Documents for a Swimming Pool / Hot Tub Permit in Arvada
You'll typically need the following when applying for a swimming pool / hot tub permit in Arvada:
- Permit application form(s) — Pool type, dimensions, depth, volume in gallons, contractor information. You may need separate applications for building, electrical, plumbing, and fence permits.
- Site plan / plot plan (to scale) — Must show property boundaries, all existing structures, proposed pool location with dimensions, distances from pool to all property lines (setbacks), distances to house and other structures, easements, septic system location (if applicable), and proposed fence/barrier location.
- Pool design and engineering plans — Structural details, cross-sections, materials, depth markings, steps and ladder locations, deck and footing details. For in-ground pools, these are typically prepared by the pool contractor or a structural engineer.
- Barrier/fence plan — Fence height (minimum 48 inches), gate locations with self-closing and self-latching hardware details, compliance with the 4-inch sphere rule, and whether the house wall will serve as one side of the barrier.
- Electrical plan — Pump motor location, GFCI protection for all pool circuits, bonding grid layout (minimum 8 AWG solid copper extending 3 feet beyond pool walls), lighting, conduit runs, and panel location. Must comply with NEC Article 680.
- Drainage plan — How pool overflow, deck drainage, and backwash water will be directed away from the pool, neighboring properties, and building foundations. Some jurisdictions prohibit discharge to storm drains.
Requirements may vary. Contact Building Services for the complete list of required documents.
Common Mistakes to Avoid in Arvada
Not meeting barrier/fence requirements
The most frequently failed pool inspection item. The barrier must be at least 48 inches high with no openings that allow a 4-inch sphere to pass through. Gates must be self-closing and self-latching, opening away from the pool, with the latch at least 54 inches above grade on the non-pool side. No climbable features (like horizontal rails) on the outside of the fence. The barrier must typically be complete before the pool is filled with water.
Not checking setbacks before digging
Pool setbacks from property lines vary widely — from 3 feet in some cities to 25 feet from street-facing property lines in others. Most common is 5–10 feet from side and rear lines. Moving a pool after excavation is catastrophically expensive. Verify your exact setback requirements and measure carefully before any digging begins.
Skipping the 811 call before excavation
Hitting a gas, electric, water, or sewer line during pool excavation can cause injury, massive repair costs, and legal liability. Call 811 at least 3 business days before digging — it's free and it's the law. Also check for private utility lines (like propane) that 811 may not cover.
Electrical bonding and GFCI failures
NEC Article 680 requires bonding all metal within 5 feet of the pool with minimum 8 AWG solid copper conductor, plus an equipotential bonding grid extending 3 feet beyond pool walls. All pool pump motors require GFCI protection. Receptacles must be at least 6 feet from the inside wall of the pool. Missing or improper bonding is a serious electrocution hazard and a common inspection failure.
Drainage affecting neighboring properties
Pool construction changes grading and water runoff patterns. Directing pool backwash, overflow, or deck drainage onto neighboring property can violate local codes and create legal disputes. Plan your drainage system carefully — consider a French drain or catch basin system around the pool deck.
Not getting all required permits
Getting only a building permit but skipping the electrical, plumbing, or fence permits is a common oversight. Each trade typically requires its own permit and separate inspections. Missing permits mean uninspected work — and uninspected pool electrical work is a serious safety hazard.
Building too close to a septic system
Pools must maintain a minimum distance from septic tanks and drain fields, typically 10–25 feet. Excavation too close to a septic system can cause structural damage to the tank or crush drain field piping. Check your septic system location before choosing your pool placement.
Assuming above-ground pools don't need permits
Many homeowners incorrectly believe above-ground pools are exempt. Most jurisdictions require permits for any pool over 24 inches deep — which includes the vast majority of above-ground pools sold for residential use. Barrier/fence requirements also apply to above-ground pools.
Not pulling a permit at all
Unpermitted pools create serious problems: title issues when selling your home, insurance denial for pool-related claims, fines and penalties, and potential requirement to remove the pool entirely. Retroactive permits, if allowed, come with penalty fees and may require destructive inspection of completed work.
Required Inspections in Arvada
Most swimming pool / hot tub projects in Arvada require inspections at each construction stage:
Excavation / Pre-Steel Inspection
When: After excavation is complete but before reinforcing steel is placed
Excavation dimensions match approved plans, proper depth and shape, soil conditions are adequate, setbacks from property lines verified on-site, and no conflicts with utilities or easements.
Common failures: Pool location doesn't match approved site plan, excavation too close to property line, unexpected soil conditions requiring engineering changes.
Steel / Rebar and Plumbing Inspection
When: After reinforcing steel is installed and plumbing lines are in place, but before gunite or shotcrete is applied — this is one of the most critical inspections
Rebar spacing, placement, and tie-wire connections per engineering plans, main drain installed and positioned correctly, bonding wire (8 AWG minimum solid copper) attached to rebar grid, all plumbing lines in place and pressure-tested (minimum 35 PSI for 15 minutes with no leaks).
Common failures: Rebar spacing incorrect, bonding wire not properly connected to rebar, plumbing failing pressure test, main drain position doesn't match plans.
Electrical Bonding Inspection
When: After the bonding grid is installed but before the pool deck is poured
All metal within 5 feet of pool edge is bonded with minimum 8 AWG bare solid copper, equipotential bonding grid extends 3 feet horizontally beyond pool walls, grid installed 4–6 inches below deck subgrade, bonding connections at minimum 4 points around the perimeter, pool water bonded via a listed device, and GFCI protection on all pool pump circuits.
Common failures: Bonding grid not extending far enough beyond pool walls, missing connections to nearby metal (fences, door frames, railings within 5 feet), incorrect conductor size.
Barrier / Fence Inspection
When: After the pool fence or barrier is installed — must typically be complete before the pool is filled with water
Fence meets 48-inch minimum height, gates are self-closing and self-latching, latch at 54 inches on non-pool side, no openings allow a 4-inch sphere to pass through, bottom clearance within limits (2 inches over soft surfaces, 4 inches over hard surfaces), no climbable features on the outside, and fence completely encloses the pool area.
Common failures: Gates not self-closing properly, latch height too low, openings exceeding 4 inches, climbable horizontal rails on the outside of fence, fence doesn't fully enclose the pool.
Final Inspection
When: After all work is complete — pool filled, equipment running, all finishes and safety features in place
All previous corrections verified, GFCI protection confirmed on all pool circuits, all bonding and grounding per NEC 680, equipment properly installed and operational, receptacles at proper distance from pool (minimum 6 feet), drain covers are ASME A112.19.8 compliant (anti-entrapment), barrier fully compliant, and all permits can be closed.
Common failures: GFCI not functional, drain covers not anti-entrapment compliant, equipment not properly grounded, outstanding corrections from earlier inspections.
Schedule inspections with Building Services at (720) 898-7620 at least 24–48 hours in advance.
Pro Tips for Swimming Pool / Hot Tub Permits in Arvada
- Pool barrier requirements are strict and the most common source of inspection failures. Key numbers to remember: 48 inches minimum height, 4-inch sphere rule for openings, 54-inch latch height on the non-pool side, and gates must be self-closing and self-latching opening away from the pool.
- Understand the difference between bonding and grounding. Bonding connects all metal parts together to equalize voltage potential (prevents shock). Grounding connects the system to earth for fault protection. Both are required under NEC Article 680 and use different conductors — bonding uses minimum 8 AWG bare solid copper.
- Call 811 before any excavation — it's free and required by law. Also ask about private utility lines (propane, private water, telecom) that 811 may not mark. Hitting a line during pool excavation is extremely dangerous and expensive.
- Check setback requirements before finalizing your pool design. Setbacks vary widely (3–25 feet from property lines). The pool's water edge is usually the measurement point. Pool equipment (pumps, heaters) also has setback requirements and may be subject to noise ordinances.
- Your house wall can serve as one side of the pool barrier (per ISPSC Section 305.4), but doors leading to the pool area need self-closing hardware with alarms or self-latching locks at 54 inches. This can save the cost of fencing one side.
- Above-ground pool walls can count as the barrier if they meet height requirements and the manufacturer approves — but the ladder or access point must be removable or lockable when not in use.
- Plan your drainage system before construction begins. Pool deck drainage must flow away from the pool, not toward neighboring properties. Backwash water discharge must comply with local rules — some areas prohibit discharge to storm drains.
- If you have a septic system, verify the required clearance distance before choosing your pool location. Typically 10–25 feet from the tank and drain field. Excavation too close can damage the septic system.
- Budget for all permits upfront. A complete in-ground pool project may require building, electrical, plumbing, and fence permits totaling $500–$3,000+. Your pool contractor should include permit costs in their proposal.
- Keep all permit documentation, inspection records, and equipment warranties. You'll need them for insurance coverage and when selling your home. An unpermitted pool can block a home sale or result in insurance claim denial.
Frequently Asked Questions
Whether you need a permit depends on the size and scope of your swimming pool / hot tub project. In Arvada, some smaller projects are exempt while larger ones require a permit. Use our free lookup tool to check your specific situation.
Permit fees for swimming pool / hot tub projects in Arvada typically range from $50 – $1,425. Fees are usually based on the estimated project value.
Typical approval time in Arvada is About 2 weeks. Complex projects requiring structural review may take longer.
In most cases, homeowners in Arvada can pull permits and perform work on their own primary residence as an owner-builder. You're still responsible for meeting all code requirements and passing inspections.
Working without a required permit in Arvada can result in fines, stop-work orders, required removal of completed work, and complications when selling your home.
Ready to check your swimming pool / hot tub project in Arvada?
Use our free lookup tool to get a personalized answer based on your specific project details.
Free Permit Lookup →Other Permit Guides for Arvada, CO
Explore more permit guides for Arvada:
Swimming Pool / Hot Tub Permits in Nearby Cities
See swimming pool / hot tub permit requirements in other Colorado cities:
See Detailed Swimming Pool / Hot Tub Rules for Arvada
View all local rules, exemptions, and fee details on the permit page.
Swimming Pool / Hot Tub Permit Rules →