Building Permits in Apex, NC
Check permit requirements for home improvement projects in Apex. Select a project type below to see local requirements, estimated fees, and how to apply.
Key Exemptions in Apex
These projects typically don't require a building permit in Apex:
Small at-grade patio slabs under 120 square feet are typically exempt from building permits per IRC R105.2 (extended via local amendment). The slab must be at-grade (not more than 30 inches above adjacent grade) and not part of an accessible route.
Freestanding decks not more than 30 inches above grade are exempt from a building permit per NC Residential Code R105.2.
Replacing an existing driveway in the same footprint with no changes to the curb cut is generally exempt from permit requirements.
Plugging a Level 1 (120V) EV charger into an existing outlet is NOT considered new electrical work and does not require a permit. This is the only permit-free EV charging method — just plug in and charge. Adds approximately 4-5 miles of range per hour.
Relighting a pilot light or adjusting an existing appliance's shutoff valve does not require a permit. Replacing a listed flexible appliance connector at an existing appliance is also typically exempt. Any work involving new piping, pipe extension, or appliance connections requires a permit.
See all rules by selecting a project type below, or use our free lookup tool for a personalized answer.
Get a personalized answer
Our lookup tool asks a few questions about your specific project to give you the most accurate answer.
Check Your Project →Apex Building Department
Nearby Cities in North Carolina
Permit Guides
Read our in-depth guides for common home improvement projects: