Patio / Hardscape Permit Requirements in Revere, MA
Massachusetts State Building Code, 10th Edition (based on 2021 IBC/IRC with MA amendments). All permits via Citizenserve e-permitting portal. Residential $12/$1,000 valuation; $50 application fee. Located in Suffolk County.
When you DON'T need a permit
Uncovered at-grade patios under 200 square feet generally do not require a building permit. The patio must still comply with setback requirements and impervious surface limits.
Source: City of Revere Inspectional Services / Massachusetts Building Code 10th Edition (based on 2021 IRC)
When you DO need a permit
Covered patios with a solid roof structure require a building permit. They are treated as structural additions and must meet wind and snow load requirements, setback rules, and building code standards.
Typical timeline: About 2 weeks
Source: City of Revere Inspectional Services / Massachusetts Building Code 10th Edition (based on 2021 IRC)
Elevated patios or platforms more than 30 inches above grade are treated as decks and require a building permit. Structural footings, guard rails (minimum 36 inches), and inspections are required.
Typical timeline: About 2 weeks
Source: City of Revere Inspectional Services / Massachusetts Building Code 10th Edition (based on 2021 IRC)
What Makes Revere Different
Here's how Revere's patio / hardscape rules stack up against the standard IRC baseline that most of the country follows.
Stricter Than the IRC
Covered patios with a solid roof structure require a building permit. They are treated as structural additions and must meet wind and snow load requirements, setback rules, and building code standards.
Elevated patios or platforms more than 30 inches above grade are treated as decks and require a building permit. Structural footings, guard rails (minimum 36 inches), and inspections are required.
1 rule match the IRC baseline — no surprises there.
Patio / Hardscape Permit Costs: Revere vs. Nearby
| City | Estimated Fee |
|---|---|
| Revere | — |
| Boston | $225 – $750 |
| Boston | $150 – $600 |
Fees shown are estimates based on local building code data. Actual fees may vary based on project scope and valuation.
Zoning & HOA Considerations
Patios contribute to impervious surface coverage on your lot. Many cities cap total impervious coverage at 40–60% of lot area. Check with your planning department before adding large hardscape areas.
If you live in an HOA community: hOAs may restrict patio materials, colors, and sizes. Covered patios and pergolas are more likely to need architectural review. Check your CC&Rs before starting, even for simple ground-level projects.
Check your specific project
Answer a few quick questions to get a personalized answer for your exact project.
Check Now — Free →Building Department Contact
Frequently Asked Questions
Contact Revere's building department for current Patio / Hardscape permit fee information. Fees typically vary based on project scope and valuation.
It depends on the specifics of your project. Some smaller Patio / Hardscape projects may be exempt from permit requirements, while larger ones typically require a permit. Use our free lookup tool to check your specific situation.
Working without a required permit in Revere can result in fines, stop-work orders, being required to remove completed work, and complications when selling your home. It's always best to check first.
Typical approval time for Patio / Hardscape permits in Revere is About 2 weeks. More complex projects may take longer if plan review is required.
If you live in an HOA community, you may need architectural review approval in addition to a building permit. HOA rules and city building codes are separate — you may need to satisfy both. Review your CC&Rs and submit to your HOA's architectural review committee before starting work.
Learn More About Patio / Hardscape Permits
Read our complete guide covering permit requirements, costs, common exemptions, and the application process.
Read Patio / Hardscape Guide →