Fence / Gate Permit Requirements in Gilbert, AZ
Technical Codes of Gilbert - 2020 Edition adopts 2018 I-Codes.
When you DON'T need a permit
Backyard fences 6 feet or under do not require a building permit.
Source: Town of Gilbert Code / 2018 IRC
Front yard fences 4 feet or under typically do not require a permit but must comply with zoning.
Source: Town of Gilbert Code / 2018 IRC
When you DO need a permit
Fences over 6 feet require a building permit.
Estimated fee: $50 – $190
Typical timeline: About 2 weeks
Source: Town of Gilbert Code / 2018 IRC
Masonry/block fences require a building permit due to structural and footing requirements.
Estimated fee: $70 – $285
Typical timeline: About 2 weeks
Source: Town of Gilbert Code / 2018 IRC
Pool barrier fences must meet safety requirements and typically require a permit.
Estimated fee: $50 – $190
Typical timeline: About 1 week
Source: Town of Gilbert Code / 2018 IRC
Front-yard fences and fences above certain heights may require zoning approval. Many cities limit front-yard fence height to 3–4 feet. Check setback and height limits with your planning department.
Check your specific project
Answer a few quick questions to get a personalized answer for your exact project.
Check Now — Free →Free Lookup vs. Pro Report
$7.99Less than a coffee. Could save you a $5,000 fine.
- Permit required / exempt answer
- Code citation
- Estimated fee range
- Approval timeline
- Building dept contact
- Step-by-step application guide
- Required documents checklist
- Complete fee breakdown
- Contractor vs. owner-builder info
- Setback & height requirements
- Printable PDF-ready report
One-time payment. 30-day money-back guarantee.
Contractors: speed up your bidding — get exact requirements for your client in seconds.
Building Department Contact
Frequently Asked Questions
Estimated permit fees for Fence / Gate projects in Gilbert, AZ range from $50 – $190. Fees vary based on project scope and valuation.
It depends on the specifics of your project. Some smaller Fence / Gate projects may be exempt from permit requirements, while larger ones typically require a permit. Use our free lookup tool to check your specific situation.
Working without a required permit in Gilbert can result in fines, stop-work orders, being required to remove completed work, and complications when selling your home. It's always best to check first.
Typical approval time for Fence / Gate permits in Gilbert is About 2 weeks. More complex projects may take longer if plan review is required.
Learn More About Fence / Gate Permits
Read our complete guide covering permit requirements, costs, common exemptions, and the application process.
Read Fence / Gate Guide →