How to Get a HVAC Permit in Denver, CO (2026 Guide)
Everything you need to know about hvac permits in Denver, CO, local requirements, fees, timelines, and how to apply.
By Joey, Founder · Last updated May 23, 2026 · How we research →
Check your specific hvac project
Get an instant, personalized answer for your exact project details in Denver.
Free Permit Lookup →Do You Need a HVAC Permit in Denver?
Based on Denver's local building codes, you'll need a permit when:
HVAC replacements require a permit in Denver, CO. High altitude derating applies.
Changing HVAC type requires permits in Denver, CO.
Adding central HVAC requires permits in Denver, CO. Manual J at altitude required.
Ductwork modifications require a permit in Denver, CO.
Permit Fees in Denver
Based on local Denver permit data, fees for hvac projects typically range:
Here's how fees break down by project scope nationally:
| Project Scope | Typical Permit Fee |
|---|---|
| Furnace or AC replacement | $75 – $300 |
| Heat pump installation | $100 – $350 |
| Mini-split installation | $75 – $250 |
| New ductwork | $100 – $400 |
| Gas line permit (separate) | $50 – $200 |
| Electrical permit (if needed for new circuits) | $50 – $200 |
Fees are typically calculated based on estimated project value. Contact Community Planning and Development (CPD) for exact amounts.
How Long Does It Take?
In Denver, typical approval time for hvac permits is 5 business days.
More complex projects requiring structural review or variances may take longer. Simple projects may qualify for expedited or over-the-counter review in some cases.
How to Apply for a HVAC Permit in Denver
- 1 Check requirements: Use our free lookup tool or contact Community Planning and Development (CPD) to confirm your project needs a permit.
- 2 Gather documents: Prepare your application, site plan, construction drawings, and any other required documents.
- 3 Submit online: Denver accepts applications online at Community Planning and Development (CPD).
- 4 Pay fees: Pay the applicable permit fees ($75 – $1,000).
- 5 Wait for approval: Your application will be reviewed by Denver plan reviewers. Typical turnaround is 5 business days.
- 6 Begin work: Once approved, post your permit visibly at the job site before starting work.
- 7 Schedule inspections: Call Community Planning and Development (CPD) at (720) 865-2700 to schedule required inspections at each phase of the project.
Denver Building Department Contact
Required Inspections in Denver
Most hvac projects in Denver require inspections at each construction stage:
Rough-In Mechanical Inspection (new ductwork), Duct sizing and support/hanging, duct sealing at all joints (mastic or UL 181-rated tape), return air pathways, equipment location clearances, combustion air provisions per IRC G2407, and condensate drain routing.
Gas Piping Pressure Test, Gas piping system pressurized (typically 3 PSI for 10 minutes or per local code) with no pressure drop, indicating no leaks. Inspector witnesses the test or verifies documented results. Proper sediment trap (dirt leg) installed ahead of each appliance.
Final Mechanical Inspection, Equipment installed per manufacturer instructions, gas connections tight and leak-tested, venting is correct material with proper slope and termination clearances, condensate drainage functional, thermostat operation verified, CO detectors installed (required in many jurisdictions near gas appliances), system fires up and operates correctly, clearance to combustibles maintained, filter accessible, and equipment nameplate matches the permit.
Schedule inspections with Community Planning and Development (CPD) at (720) 865-2700 at least 24–48 hours in advance.
Frequently Asked Questions
Whether you need a permit depends on the size and scope of your hvac project. In Denver, some smaller projects are exempt while larger ones require a permit. Use our free lookup tool to check your specific situation.
Permit fees for hvac projects in Denver typically range from $75 – $1,000. Fees are usually based on the estimated project value.
Typical approval time in Denver is 5 business days. Complex projects requiring structural review may take longer.
In most cases, homeowners in Denver can pull permits and perform work on their own primary residence as an owner-builder. You're still responsible for meeting all code requirements and passing inspections.
Working without a required permit in Denver can result in fines, stop-work orders, required removal of completed work, and complications when selling your home.
Ready to check your hvac project in Denver?
Use our free lookup tool to get a personalized answer based on your specific project details.
Free Permit Lookup →Other Permit Guides for Denver, CO
Explore more permit guides for Denver:
HVAC Permits in Nearby Cities
See hvac permit requirements in other Colorado cities:
See Detailed HVAC Rules for Denver
View all local rules, exemptions, and fee details on the permit page.
HVAC Permit Rules →