How to Get a Fence Permit in Franklin, TN (2026 Guide)
Everything you need to know about fence permits in Franklin, TN, local requirements, fees, timelines, and how to apply.
By Joey, Founder · Last updated May 23, 2026 · How we research →
Check your specific fence project
Get an instant, personalized answer for your exact project details in Franklin.
Free Permit Lookup →Do You Need a Fence Permit in Franklin?
Based on Franklin's local building codes, you'll need a permit when:
Fences over 6 feet require a building permit.
These fence projects are typically exempt in Franklin:
Backyard fences 6 feet or under typically do not require a building permit.
Front yard fences 4 feet or under typically do not require a permit but must comply with zoning.
Permit Fees in Franklin
Based on local Franklin permit data, fees for fence projects typically range:
Here's how fees break down by project scope nationally:
| Project Scope | Typical Permit Fee |
|---|---|
| Simple residential fence (under 6 ft) | $25 – $150 |
| Front-yard or taller fence (6+ ft) | $50 – $200 |
| Masonry or engineered fence | $150 – $500+ |
| Pool barrier fence | $50 – $200 |
| Inspection fee (if separate from permit) | $25 – $85 |
| Structural engineering (masonry walls, if required) | $500 – $2,000+ (separate from permit) |
Fees are typically calculated based on estimated project value. Contact Building & Neighborhood Services for exact amounts.
How Long Does It Take?
In Franklin, typical approval time for fence permits is about 2 weeks.
More complex projects requiring structural review or variances may take longer. Simple projects may qualify for expedited or over-the-counter review in some cases.
How to Apply for a Fence Permit in Franklin
- 1 Check requirements: Use our free lookup tool or contact Building & Neighborhood Services to confirm your project needs a permit.
- 2 Gather documents: Prepare your application, site plan, construction drawings, and any other required documents.
- 3 Submit your application: Visit Building & Neighborhood Services or apply in person at 120 9th Ave S, Franklin, TN 37064.
- 4 Pay fees: Pay the applicable permit fees ($55 – $220).
- 5 Wait for approval: Your application will be reviewed by Franklin plan reviewers. Typical turnaround is about 2 weeks.
- 6 Begin work: Once approved, post your permit visibly at the job site before starting work.
- 7 Schedule inspections: Call Building & Neighborhood Services at (615) 794-7012 to schedule required inspections at each phase of the project.
Franklin Building Department Contact
Required Inspections in Franklin
Most fence projects in Franklin require inspections at each construction stage:
Post Hole / Footing Inspection, Hole depth (typically 1/3 to 1/2 of the above-ground post height, and below the frost line in cold climates), hole diameter (typically 3x the post width), bearing on undisturbed soil, correct post locations matching the approved site plan, and proper setback from property lines and easements.
Final Inspection, Overall height compliance with the approved plans, correct location and setbacks, structural integrity, proper gate operation, material compliance, 'good side out' compliance (if applicable), and general code compliance. For pool barrier fences: self-closing gates, self-latching mechanism at 54 inches, no climbable features, and no openings larger than 4 inches.
Schedule inspections with Building & Neighborhood Services at (615) 794-7012 at least 24–48 hours in advance.
Frequently Asked Questions
Whether you need a permit depends on the size and scope of your fence project. In Franklin, some smaller projects are exempt while larger ones require a permit. Use our free lookup tool to check your specific situation.
Permit fees for fence projects in Franklin typically range from $55 – $220. Fees are usually based on the estimated project value.
Typical approval time in Franklin is about 2 weeks. Complex projects requiring structural review may take longer.
In most cases, homeowners in Franklin can pull permits and perform work on their own primary residence as an owner-builder. You're still responsible for meeting all code requirements and passing inspections.
Working without a required permit in Franklin can result in fines, stop-work orders, required removal of completed work, and complications when selling your home.
Ready to check your fence project in Franklin?
Use our free lookup tool to get a personalized answer based on your specific project details.
Free Permit Lookup →Other Permit Guides for Franklin, TN
Explore more permit guides for Franklin:
Fence Permits in Nearby Cities
See fence permit requirements in other Tennessee cities:
See Detailed Fence Rules for Franklin
View all local rules, exemptions, and fee details on the permit page.
Fence Permit Rules →