How to Get a Concrete Slab Permit in Pembroke Pines, FL (2026 Guide)

Everything you need to know about concrete slab permits in Pembroke Pines, FL, local requirements, fees, timelines, and how to apply.

By Joey, Founder · Last updated May 23, 2026 · How we research →

$75 – $600 Permit Fees
5 business days Approval Time
4 Local Rules

Check your specific concrete slab project

Get an instant, personalized answer for your exact project details in Pembroke Pines.

Free Permit Lookup →

Do You Need a Concrete Slab Permit in Pembroke Pines?

Based on Pembroke Pines's local building codes, you'll need a permit when:

Required·Rule 1

Concrete slabs over 200 square feet typically require a building permit. The permit ensures compliance with IRC R506 (slab design), proper drainage, and impervious surface limits where applicable.

SourceFlorida Building Code 8th Edition (2023, based on 2021 IRC)
Required·Rule 2

Any slab elevated more than 30 inches above adjacent grade requires a building permit. The IRC R105.2 exemption only applies to sidewalks and driveways at or near grade level. Elevated slabs are treated as structural elements and may require footings, guard rails (36 inches minimum per IRC R312.1 for walking surfaces 30+ inches above grade), and engineering review.

SourceFlorida Building Code 8th Edition (2023, based on 2021 IRC)
Required·Rule 3

Any concrete work in the public right-of-way (sidewalks, curb cuts, driveway approaches) ALWAYS requires a permit from Public Works or the Transportation department, not the building department. This applies even if you're replacing an existing damaged sidewalk in front of your own house. The permit ensures ADA compliance, proper slope, and coordination with existing public infrastructure.

SourceFlorida Building Code 8th Edition (2023, based on 2021 IRC)

These concrete slab projects are typically exempt in Pembroke Pines:

Exempt·Rule 1

Small at-grade patio slabs under 120 square feet are typically exempt from building permits per IRC R105.2 (extended via local amendment). The slab must be at-grade (not more than 30 inches above adjacent grade) and not part of an accessible route.

SourceFlorida Building Code 8th Edition (2023, based on 2021 IRC)

Permit Fees in Pembroke Pines

Based on local Pembroke Pines permit data, fees for concrete slab projects typically range:

$75 – $600 Pembroke Pines Permit Fee Range

Here's how fees break down by project scope nationally:

Project ScopeTypical Permit Fee
Building permit (small patio under 200 sq ft)$75 – $200
Building permit (larger flatwork)$150 – $500
Right-of-way / encroachment permit$100 – $500+
Stormwater permit (for large impervious additions)$200 – $2,000
Plain broom-finish concrete patio$6 – $10 per sq ft
Stamped concrete (basic pattern)$12 – $18 per sq ft
Stamped concrete (complex/color)$18 – $30 per sq ft
Exposed aggregate$8 – $14 per sq ft
Colored concrete (integral color)$9 – $14 per sq ft
Driveway (4-inch standard)$5 – $10 per sq ft
Sidewalk replacement$5 – $8 per sq ft
Demolition of existing concrete (additional)$2 – $4 per sq ft
Geotechnical soils report (expansive soil areas)$500 – $2,500

Fees are typically calculated based on estimated project value. Contact Building Department for exact amounts.

How Long Does It Take?

In Pembroke Pines, typical approval time for concrete slab permits is 5 business days.

More complex projects requiring structural review or variances may take longer. Simple projects may qualify for expedited or over-the-counter review in some cases.

How to Apply for a Concrete Slab Permit in Pembroke Pines

  1. 1 Check requirements: Use our free lookup tool or contact Building Department to confirm your project needs a permit.
  2. 2 Gather documents: Prepare your application, site plan, construction drawings, and any other required documents.
  3. 3 Submit online: Pembroke Pines accepts applications online at Building Department.
  4. 4 Pay fees: Pay the applicable permit fees ($75 – $600).
  5. 5 Wait for approval: Your application will be reviewed by Pembroke Pines plan reviewers. Typical turnaround is 5 business days.
  6. 6 Begin work: Once approved, post your permit visibly at the job site before starting work.
  7. 7 Schedule inspections: Call Building Department at (954) 435-6502 to schedule required inspections at each phase of the project.

Pembroke Pines Building Department Contact

NameBuilding Department
Apply OnlineApply online
Address601 City Center Way, 2nd Floor, Pembroke Pines, FL 33025
HoursMon-Thu 7:30am-5pm

Required Inspections in Pembroke Pines

Most concrete slab projects in Pembroke Pines require inspections at each construction stage:

Inspection·Stage 1

Pre-pour inspection (for permitted work), Form dimensions and placement per approved plans, reinforcement type and spacing (if specified), vapor retarder installation (if required), base course thickness and compaction, proper grading for drainage, setbacks from property lines and structures.

WhenAfter forms are set, reinforcement installed, but before concrete pour
Common FailuresForms in wrong location, insufficient base course, missing reinforcement where required, vapor retarder damaged or missing, wrong slab slope for drainage.
Inspection·Stage 2

Final inspection, Slab thickness, finish quality, control joints at proper spacing, drainage away from structures, no cracking beyond expected control joint lines, proper curing, compliance with approved plans.

WhenAfter concrete is poured and cured
Common FailuresSlab too thin, no control joints, poor finish, drainage toward house foundation, uncontrolled cracking from lack of curing.
Inspection·Stage 3

ROW inspection (for sidewalks, curb cuts, approaches), Compliance with city standard details, proper slope and grade, ADA compliance (where applicable), integration with existing curb and sidewalk, no damage to adjacent public infrastructure.

WhenAfter completion by Public Works
Common FailuresWrong slope (too steep or not draining), non-standard dimensions, ADA non-compliance, damage to curb or adjacent public concrete.

Schedule inspections with Building Department at (954) 435-6502 at least 24–48 hours in advance.

Frequently Asked Questions

Whether you need a permit depends on the size and scope of your concrete slab project. In Pembroke Pines, some smaller projects are exempt while larger ones require a permit. Use our free lookup tool to check your specific situation.

Permit fees for concrete slab projects in Pembroke Pines typically range from $75 – $600. Fees are usually based on the estimated project value.

Typical approval time in Pembroke Pines is 5 business days. Complex projects requiring structural review may take longer.

In most cases, homeowners in Pembroke Pines can pull permits and perform work on their own primary residence as an owner-builder. You're still responsible for meeting all code requirements and passing inspections.

Working without a required permit in Pembroke Pines can result in fines, stop-work orders, required removal of completed work, and complications when selling your home.

Ready to check your concrete slab project in Pembroke Pines?

Use our free lookup tool to get a personalized answer based on your specific project details.

Free Permit Lookup →

Concrete Slab Permits in Nearby Cities

See concrete slab permit requirements in other Florida cities:

See Detailed Concrete Slab Rules for Pembroke Pines

View all local rules, exemptions, and fee details on the permit page.

Concrete Slab Permit Rules →
Disclaimer: This guide provides general information about concrete slab permit requirements in Pembroke Pines, FL. Requirements can change. Always confirm with Building Department before starting any project. PermitMint provides general guidance, not legal advice.